書く 研究論文履歴書学位論文研究費申請書研究論文 雑務は少なく。
Oleafly は、LaTeX・Typst・Markdown で論文を書くための無料デスクトップワークスペースです。文献探し、引用管理、そして論文が形になっていく様子の確認を、ひとつの場所で行えます。AI アシスタントに節の修正、図の作成、壊れたビルドの修復を任せ、その変更はレビューできます。プロジェクトはあなたが所有する普通のファイルのまま残り、エディタは AI があってもなくても使えます。
\[ E = h\nu \]\[ E = h\nu \]\[ \int_{-\infty}^{\infty} e^{-x^2}\,dx = \sqrt{\pi} \]\[ \Delta G = \Delta H - T\Delta S \]\[ \Delta G = \Delta H - T\Delta S \]\[ a^2 + b^2 = c^2 \]



+2
再コンパイル
results.tex に共著者 3 人


+2
コンパイル
in mammary epithelial cells
Figure 1: Growth factors reach ERK through one cascade but leave different temporal signatures. (a) Receptor tyrosine kinases converge on the RAS–RAF–MEK–ERK module. (b) Single-cell ERK activity from the kinase translocation reporter after stimulation at t = 0.
Cells read growth factors through a small number of shared kinases, yet they respond to EGF, HGF and IGF-1 with different fates. We imaged ERK activity in 2,184 MCF10A cells with a kinase translocation reporter and found that each ligand produces pulses at a characteristic frequency rather than a characteristic amplitude. Frequency alone identifies the ligand in 91 percent of cells.
Epidermal growth factor, hepatocyte growth factor and insulin-like growth factor all reach the nucleus through the same RAS–RAF–MEK–ERK module [1], yet epithelial cells answer them with migration, scattering or growth. How a single kinase carries that distinction has been a long-standing question. Early work in PC-12 cells tied fate to whether ERK activity was transient or sustained [2, 3].
Live-cell reporters changed the picture. In single cells ERK does not rise and settle; it fires in discrete pulses, and the pulse frequency tracks the growth factor dose [4, 5]. Here we ask whether frequency also encodes which growth factor a cell has seen.
We find that it does. Each ligand sets its own pulse rate, the rate survives changes in dose, and cells that keep pulsing are the ones that go on to divide. The same code is rescaled, not erased, in cells carrying an activating RAS mutation. Blocking the pulses with a MEK inhibitor at 60 minutes stopped division under all three ligands. Section 2 sets out these results, Section 3 discusses what they mean for signalling by timing, and Section 4 gives the imaging and decoding methods.
We stimulated MCF10A cells expressing the ERK kinase translocation reporter [6] with saturating doses of EGF, HGF or IGF-1 and tracked nuclear and cytoplasmic signal every two minutes in 2,184 cells for four hours. All three ligands produced the same first spike within ten minutes (Figure 1b). After that the responses diverged: EGF drove pulses about every 19 minutes, HGF about every 41, and IGF-1 rarely more than once an hour (Table 1).
Table 1: Pulse statistics between 15 and 120 minutes after stimulation. Medians across cells.
| Ligand | Dose | Pulses/h | Width | Cells |
| EGF | 20 | 3.1 | 7.8 | 812 |
| HGF | 50 | 1.5 | 8.4 | 694 |
| IGF-1 | 100 | 0.8 | 9.6 | 521 |
| Vehicle | – | 0.2 | 11.2 | 157 |
Pulse amplitude overlapped almost completely between ligands, so we trained a decoder on inter-pulse intervalsthe gaps between pulses alone. Given the first two hours of a single cell's trace, it named the ligand correctly in 91 percent of held-out cells, compared with 47 percent for a decoder that saw only amplitudes. Shuffling the intervals within each cell removed the signal, and so did pooling cells across doses.
A decoder trained on amplitudes alone did no better than chance for HGF against IGF-1, while interval-based decoding separated all three ligands after the first hour of imaging.
Cells that kept pulsing past the second hour entered S phase within 18 hours in 74 percent of cases, against 21 percent for cells whose pulses stopped early (Figure 2). Pulse count over the first four hours predicted entry better than mean ERK activity over the same window.
Frequency coding lets one kinase carry several messages without crosstalk at the level of amplitude.
Mutant RAS rescales this code rather than erasing it [7], which suggests the frequency channel survives oncogenic signalling and could be read by downstream targets that integrate over time.
MCF10A cells were imaged every two minutes for four hours on a widefield microscope with environmental control. Nuclear and cytoplasmic reporter signal was segmented automatically and checked by hand for a random subset of cells.
Lucas Moreau
編集者
sections/methods.tex を編集中
Daniel Hart
編集者
sections/results.tex を編集中
- 言語解析現在のプロジェクトリビジョンを解析しました
- コンパイル中PDF 出力を生成して検証しています
- PDF を描画中検証済みのコンパイル結果を待っています
Single-Fault LATEX Compilation Repair
Independent Researcher
San Jose, CA, USA
Abstract—Compilation repair for LaTeX is easy to score badly. A candidate may compile after deleting or hiding content, while exact source equality rejects valid alternative repairs. We present TeXFix-Bench, a controlled benchmark for repairing complete, broken LaTeX sources under a pinned engine. The generator applies 12 deterministic single-fault operators to 13 hand-authored seed documents. It retains 627 engine-validated rows, comprising 300 unique hard-track inputs and 67 unique warning-only inputs after hash deduplication.
Index Terms—automated program repair, LaTeX, benchmark, compilation, large language models, reproducibility
LaTeX compilation failures are a practical target for automated repair. A missing delimiter or misspelled control sequence can prevent a complete document from building, and the first reported diagnostic may be distant from the underlying fault. LLM-assisted writing systems now operate inside LaTeX editors , but their publications do not provide a public, engine-pinned evaluation of compilation-failure repair.
Program repair benchmarks pair a defect with an executable oracle and a fixed harness . TeXFix-Bench studies a narrower contract: a broken source document in, a repaired full source out, under a specified engine.
TexOCR-Bench evaluates page-image-to-LaTeX reconstruction , and EqFix repairs errors in individual equations by synthesizing rules from examples . Overfitting to a weak oracle is a known hazard .
A system receives one broken source file and returns one repaired source file. The engine, its version, and the build command are fixed for every attempt.
Every generated row passes an engine gate before it is retained, and duplicate broken sources are removed by SHA-256 so that no input is scored twice .
Compile Recovery requires a successful Tectonic 0.17.0 run and at least 0.80 token-level LCS similarity between text extracted from the candidate and reference PDFs. Normalized exact match sits beside it, because compilation alone cannot separate a faithful repair from a deletion .
Version 0.2 results on 86 distinct hard-track inputs. CR is intention-to-treat.
| System | CR | CR % | NEM | Fail |
| Identity | 0/86 | 0.0 | 0/86 | 0 |
| Rule | 34/86 | 39.5 | 28/86 | 0 |
| Qwen-7B + fb | 57/86 | 66.3 | 17/86 | 0 |
| MiniMax M3 | 75/86 | 87.2 | 50/86 | 2 |
| DeepSeek V4 | 81/86 | 94.2 | 38/86 | 2 |
| Gemini 3.5 | 82/86 | 95.3 | 26/86 | 0 |
| Claude S5 | 85/86 | 98.8 | 52/86 | 0 |
| GPT-5.6 Sol | 85/86 | 98.8 | 66/86 | 1 |
| Grok 4.5 | 85/86 | 98.8 | 59/86 | 0 |
Claude Sonnet 5, GPT-5.6 Sol, and Grok 4.5 each recover 85 of 86 inputs, yet their normalized exact-match counts are 52, 66, and 59 . Compilation and edit precision must be reported together.
The contribution is an auditable task definition, an executable oracle, a fixed cohort, and a replayable candidate ledger.
[1]R. Just, D. Jalali, and M. D. Ernst, “Defects4J: A database of existing faults to enable controlled testing studies for Java programs,” in Proc. ISSTA, 2014, pp. 437–440.
[2]C. Le Goues, N. Holtschulte, E. K. Smith, Y. Brun, P. Devanbu, S. Forrest, and W. Weimer, “The ManyBugs and IntroClass benchmarks for automated repair of C programs,” IEEE Trans. Softw. Eng., vol. 41, no. 12, pp. 1236–1256, 2015.
[3]C. E. Jimenez, J. Yang, A. Wettig, S. Yao, K. Pei, O. Press, and K. Narasimhan, “SWE-bench: Can language models resolve real-world GitHub issues?” in Proc. ICLR, 2024.
[4]M. Chen et al., “Evaluating large language models trained on code,” arXiv:2107.03374, 2021.
[5]E. K. Smith, E. T. Barr, C. Le Goues, and Y. Brun, “Is the cure worse than the disease? Overfitting in automated program repair,” in Proc. ESEC/FSE, 2015, pp. 532–543.
[6]R. A. DeMillo, R. J. Lipton, and F. G. Sayward, “Hints on test data selection: Help for the practicing programmer,” Computer, vol. 11, no. 4, pp. 34–41, 1978.
[7]Y. Jia and M. Harman, “An analysis and survey of the development of mutation testing,” IEEE Trans. Softw. Eng., vol. 37, no. 5, pp. 649–678, 2011.
[8]R. Gupta, S. Pal, A. Kanade, and S. Shevade, “DeepFix: Fixing common C language errors by deep learning,” in Proc. AAAI, vol. 31, no. 1, pp. 1345–1351, 2017.
[9]M. Yasunaga and P. Liang, “Graph-based, self-supervised program repair from diagnostic feedback,” in Proc. ICML, PMLR, vol. 119, pp. 10799–10808, 2020.
[10]F. Zhu, Z. Liu, G. Yang, J. Li, and S. Cheung, “EqFix: Fixing LaTeX equation errors by examples,” in SETTA 2022, LNCS 13649, pp. 89–109.
[11]K. Wang et al., “TexOCR-Bench: Benchmarking page-image-to-LaTeX reconstruction,” in Proc. 64th ACL, Vol. 1, 2026.
[12]H. Wen, Z. Zhang, and Y. Li, “OverleafCopilot: Empowering academic writing in Overleaf with large language models,” arXiv:2403.09733, 2024.
[13]S. Hou et al., “PaperDebugger: Assisting scientific writing, review, and editing,” in Companion Proc. ACM Web Conf., 2026.
[14]J. Tan, K. Zhang, and X. Chen, “Inconsistencies in TeX-produced documents,” in Proc. ISSTA, 2024.
[15]L. Zheng et al., “Judging LLM-as-a-judge with MT-Bench and Chatbot Arena,” Adv. Neural Inf. Process. Syst., vol. 36, pp. 46595–46623, 2023.
[16]A. Panickssery, S. R. Bowman, and S. Feng, “LLM evaluators recognize and favor their own generations,” Adv. Neural Inf. Process. Syst., vol. 37, 2024.
[17]B. Hui et al., “Qwen2.5-Coder technical report,” arXiv:2409.12186, 2024.
[18]Meta AI, “Llama 3.2 model card,” 2024.
[19]E. Kassis et al., “Agent skills for reproducible research agents,” arXiv:2609.00065, 2026.
ibitem{legoues2015manybugs}
main.tex:956
- ステップ
- 1
- 入力
- 5,144
- 出力
- 467
- 実行回数
- 1
- ステップ
- 3
- トークン
- 39,035
費用は公開されているモデル料金に基づく見積もりで、請求額の合計ではありません。
自分の API キー(OpenAI、Anthropic、Groq など)を使うか、Ollama でモデルをローカルに動かせます。アシスタントはファイルの読み書き、プロジェクトのコンパイル、PDF の確認ができます。
プロバイダに接続Ollama でローカルのモデルを動かす
今日は何をしましょうか?「TeXFix-Bench: LaTeX Repair Bench...」で作業中
Comprehensive citation management for academic research. Search OpenAlex, PubMed, and Google Scholar for papers, extract accurate metadata, validate citations, and generate properly formatted BibTeX entries. This skill should be used when you need to find papers, verify citation information, convert DOIs to BibTeX, or ensure reference accuracy in scientific writing.
Perform bounded, local exploratory analysis of explicitly supported scientific files. Use for redacted CSV/TSV/JSON profiles; optional NumPy, HDF5, FASTA/FASTQ, and basic image metadata inspection; missingness/leakage audits; outlier and transformation sensitivity; and rigorous EDA report scaffolds. Other domain formats are reference-only and unknown formats fail closed.
Formulate evidence-bounded scientific questions, candidate hypotheses, rival explanations, causal or associational claims, discriminating predictions, measurements, and preregistration-ready analysis plans. Use when turning observations or preliminary findings into transparent, testable research plans without treating hypotheses as facts.
「TeXFix-Bench: LaTeX Repair Bench...」で作業中
Claude Code
エネルギー消費の比較には、裏付けとなる出典が必要です。序論でその主張を見つけましたが、付いている引用は検出精度についてのものです。ファイルは変更していません。
- 衛星による火災検知
- 低消費電力のセンサーネットワーク
- TinyML と量子化推論
検証できる DOI メタデータがある結果だけを残します。
write_filereferences.bib1 行目
references.bib最初の変更 · L1@article{open_science2015, title = {Estimating the Reproducibility of Psychological Science},@article{giglio2003, author = {Giglio, Louis and Descloitres, Jacques and Justice, Christopher O.}, title = {An Enhanced Contextual Fire Detection Algorithm for {MODIS}}, journal = {Remote Sensing of Environment}, year = {2003}, doi = {10.1016/S0034-4257(03)00184-6}}replace_in_filemain.tex21 行目
main.tex最初の変更 · L21Program repair benchmarks pair a defect with an executable oracle and afixed harness~\cite{just2014defects4j,legoues2015manybug}. SWE-bench extendsfixed harness~\cite{just2014defects4j,legoues2015manybugs}. SWE-bench extendsthe contract to repository-scale issues~\cite{jimenez2024swebench}.TeXFix-Bench studies a narrower contract: a system receives an existingTeXFix-Bench studies a narrower contract~\cite{zhu2022eqfix}: a system receivesSingle-Fault LATEX Compilation Repair
Independent Researcher
San Jose, CA, USA
Abstract—Compilation repair for LaTeX is easy to score badly. A candidate may compile after deleting or hiding content, while exact source equality rejects valid alternative repairs. We present TeXFix-Bench, a controlled benchmark for repairing complete, broken LaTeX sources under a pinned engine. The generator applies 12 deterministic single-fault operators to 13 hand-authored seed documents. It retains 627 engine-validated rows, comprising 300 unique hard-track inputs and 67 unique warning-only inputs after hash deduplication.
Index Terms—automated program repair, LaTeX, benchmark, compilation, large language models, reproducibility
LaTeX compilation failures are a practical target for automated repair. A missing delimiter or misspelled control sequence can prevent a complete document from building, and the first reported diagnostic may be distant from the underlying fault. LLM-assisted writing systems now operate inside LaTeX editors , but their publications do not provide a public, engine-pinned evaluation of compilation-failure repair.
Program repair benchmarks pair a defect with an executable oracle and a fixed harness . TeXFix-Bench studies a narrower contract: a broken source document in, a repaired full source out, under a specified engine.
TexOCR-Bench evaluates page-image-to-LaTeX reconstruction , and EqFix repairs errors in individual equations by synthesizing rules from examples . Overfitting to a weak oracle is a known hazard .
A system receives one broken source file and returns one repaired source file. The engine, its version, and the build command are fixed for every attempt.
Every generated row passes an engine gate before it is retained, and duplicate broken sources are removed by SHA-256 so that no input is scored twice .
Compile Recovery requires a successful Tectonic 0.17.0 run and at least 0.80 token-level LCS similarity between text extracted from the candidate and reference PDFs. Normalized exact match sits beside it, because compilation alone cannot separate a faithful repair from a deletion .
Version 0.2 results on 86 distinct hard-track inputs. CR is intention-to-treat.
| System | CR | CR % | NEM | Fail |
| Identity | 0/86 | 0.0 | 0/86 | 0 |
| Rule | 34/86 | 39.5 | 28/86 | 0 |
| Qwen-7B + fb | 57/86 | 66.3 | 17/86 | 0 |
| MiniMax M3 | 75/86 | 87.2 | 50/86 | 2 |
| DeepSeek V4 | 81/86 | 94.2 | 38/86 | 2 |
| Gemini 3.5 | 82/86 | 95.3 | 26/86 | 0 |
| Claude S5 | 85/86 | 98.8 | 52/86 | 0 |
| GPT-5.6 Sol | 85/86 | 98.8 | 66/86 | 1 |
| Grok 4.5 | 85/86 | 98.8 | 59/86 | 0 |
Claude Sonnet 5, GPT-5.6 Sol, and Grok 4.5 each recover 85 of 86 inputs, yet their normalized exact-match counts are 52, 66, and 59 . Compilation and edit precision must be reported together.
The contribution is an auditable task definition, an executable oracle, a fixed cohort, and a replayable candidate ledger.
[1]R. Just, D. Jalali, and M. D. Ernst, “Defects4J: A database of existing faults to enable controlled testing studies for Java programs,” in Proc. ISSTA, 2014, pp. 437–440.
[2]C. Le Goues, N. Holtschulte, E. K. Smith, Y. Brun, P. Devanbu, S. Forrest, and W. Weimer, “The ManyBugs and IntroClass benchmarks for automated repair of C programs,” IEEE Trans. Softw. Eng., vol. 41, no. 12, pp. 1236–1256, 2015.
[3]C. E. Jimenez, J. Yang, A. Wettig, S. Yao, K. Pei, O. Press, and K. Narasimhan, “SWE-bench: Can language models resolve real-world GitHub issues?” in Proc. ICLR, 2024.
[4]M. Chen et al., “Evaluating large language models trained on code,” arXiv:2107.03374, 2021.
[5]E. K. Smith, E. T. Barr, C. Le Goues, and Y. Brun, “Is the cure worse than the disease? Overfitting in automated program repair,” in Proc. ESEC/FSE, 2015, pp. 532–543.
[6]R. A. DeMillo, R. J. Lipton, and F. G. Sayward, “Hints on test data selection: Help for the practicing programmer,” Computer, vol. 11, no. 4, pp. 34–41, 1978.
[7]Y. Jia and M. Harman, “An analysis and survey of the development of mutation testing,” IEEE Trans. Softw. Eng., vol. 37, no. 5, pp. 649–678, 2011.
[8]R. Gupta, S. Pal, A. Kanade, and S. Shevade, “DeepFix: Fixing common C language errors by deep learning,” in Proc. AAAI, vol. 31, no. 1, pp. 1345–1351, 2017.
[9]M. Yasunaga and P. Liang, “Graph-based, self-supervised program repair from diagnostic feedback,” in Proc. ICML, PMLR, vol. 119, pp. 10799–10808, 2020.
[10]F. Zhu, Z. Liu, G. Yang, J. Li, and S. Cheung, “EqFix: Fixing LaTeX equation errors by examples,” in SETTA 2022, LNCS 13649, pp. 89–109.
[11]K. Wang et al., “TexOCR-Bench: Benchmarking page-image-to-LaTeX reconstruction,” in Proc. 64th ACL, Vol. 1, 2026.
[12]H. Wen, Z. Zhang, and Y. Li, “OverleafCopilot: Empowering academic writing in Overleaf with large language models,” arXiv:2403.09733, 2024.
[13]S. Hou et al., “PaperDebugger: Assisting scientific writing, review, and editing,” in Companion Proc. ACM Web Conf., 2026.
[14]J. Tan, K. Zhang, and X. Chen, “Inconsistencies in TeX-produced documents,” in Proc. ISSTA, 2024.
[15]L. Zheng et al., “Judging LLM-as-a-judge with MT-Bench and Chatbot Arena,” Adv. Neural Inf. Process. Syst., vol. 36, pp. 46595–46623, 2023.
[16]A. Panickssery, S. R. Bowman, and S. Feng, “LLM evaluators recognize and favor their own generations,” Adv. Neural Inf. Process. Syst., vol. 37, 2024.
[17]B. Hui et al., “Qwen2.5-Coder technical report,” arXiv:2409.12186, 2024.
[18]Meta AI, “Llama 3.2 model card,” 2024.
[19]E. Kassis et al., “Agent skills for reproducible research agents,” arXiv:2609.00065, 2026.
@article{giglio2003, title = {An Enhanced Contextual Fire Detection Algorithm for MODIS}, year = {2003},}@article{schroeder2014, title = {The New VIIRS 375 m Active Fire Detection Data Product}, year = {2014},}@article{dampage2022, title = {Forest Fire Detection System Using Wireless Sensor Networks}, year = {2022},}@article{adumanu2018, title = {Energy-Harvesting Wireless Sensor Networks: A Review}, year = {2018},}@article{adelantado2017, title = {Understanding the Limits of LoRaWAN}, year = {2017},}@article{bai2018, title = {An Empirical Evaluation of Generic Convolutional Networks}, year = {2018},}@article{jacob2018, title = {Quantization and Training of Neural Networks}, year = {2018},}@article{ray2022, title = {A Review on TinyML}, year = {2022},}@article{geifman2017, title = {Selective Classification for Deep Neural Networks}, year = {2017},}使っているプロバイダを下から接続してください。キーはこの端末にのみ保存されます。保存すると、そのプロバイダが既定になります。
設定済みのプロバイダとモデルは、チャットパネルのドロップダウンから切り替えられます。
新しいチャットを始めるときに使われます。会話ごとにチャットパネルからモデルを切り替えることもできます。
あなたの文体や好みとして、すべての AI のリクエストに追加されます。アシスタントは本来の動作に加えてこれに従います。ツールや安全上の規則を上書きすることはできません。
AI による PDF ページの取り込みを許可コンパイルしたページをエージェントが画像化し、画像認識でレイアウトを確認できるようにします。ページの画像をプロバイダに送りたくない場合は無効にしてください。
- 言語解析現在のプロジェクトリビジョンを解析しました
- コンパイル中PDF 出力を生成して検証しています
- PDF を描画中検証済みのコンパイル結果を待っています
Single-Fault LATEX Compilation Repair
Independent Researcher
San Jose, CA, USA
Abstract—Compilation repair for LaTeX is easy to score badly. A candidate may compile after deleting or hiding content, while exact source equality rejects valid alternative repairs. We present TeXFix-Bench, a controlled benchmark for repairing complete, broken LaTeX sources under a pinned engine. The generator applies 12 deterministic single-fault operators to 13 hand-authored seed documents. It retains 627 engine-validated rows, comprising 300 unique hard-track inputs and 67 unique warning-only inputs after hash deduplication.
Index Terms—automated program repair, LaTeX, benchmark, compilation, large language models, reproducibility
LaTeX compilation failures are a practical target for automated repair. A missing delimiter or misspelled control sequence can prevent a complete document from building, and the first reported diagnostic may be distant from the underlying fault. LLM-assisted writing systems now operate inside LaTeX editors , but their publications do not provide a public, engine-pinned evaluation of compilation-failure repair.
Program repair benchmarks pair a defect with an executable oracle and a fixed harness . TeXFix-Bench studies a narrower contract: a broken source document in, a repaired full source out, under a specified engine.
TexOCR-Bench evaluates page-image-to-LaTeX reconstruction , and EqFix repairs errors in individual equations by synthesizing rules from examples . Overfitting to a weak oracle is a known hazard .
A system receives one broken source file and returns one repaired source file. The engine, its version, and the build command are fixed for every attempt.
Every generated row passes an engine gate before it is retained, and duplicate broken sources are removed by SHA-256 so that no input is scored twice .
Compile Recovery requires a successful Tectonic 0.17.0 run and at least 0.80 token-level LCS similarity between text extracted from the candidate and reference PDFs. Normalized exact match sits beside it, because compilation alone cannot separate a faithful repair from a deletion .
Version 0.2 results on 86 distinct hard-track inputs. CR is intention-to-treat.
| System | CR | CR % | NEM | Fail |
| Identity | 0/86 | 0.0 | 0/86 | 0 |
| Rule | 34/86 | 39.5 | 28/86 | 0 |
| Qwen-7B + fb | 57/86 | 66.3 | 17/86 | 0 |
| MiniMax M3 | 75/86 | 87.2 | 50/86 | 2 |
| DeepSeek V4 | 81/86 | 94.2 | 38/86 | 2 |
| Gemini 3.5 | 82/86 | 95.3 | 26/86 | 0 |
| Claude S5 | 85/86 | 98.8 | 52/86 | 0 |
| GPT-5.6 Sol | 85/86 | 98.8 | 66/86 | 1 |
| Grok 4.5 | 85/86 | 98.8 | 59/86 | 0 |
Claude Sonnet 5, GPT-5.6 Sol, and Grok 4.5 each recover 85 of 86 inputs, yet their normalized exact-match counts are 52, 66, and 59 . Compilation and edit precision must be reported together.
The contribution is an auditable task definition, an executable oracle, a fixed cohort, and a replayable candidate ledger.
[1]R. Just, D. Jalali, and M. D. Ernst, “Defects4J: A database of existing faults to enable controlled testing studies for Java programs,” in Proc. ISSTA, 2014, pp. 437–440.
[2]C. Le Goues, N. Holtschulte, E. K. Smith, Y. Brun, P. Devanbu, S. Forrest, and W. Weimer, “The ManyBugs and IntroClass benchmarks for automated repair of C programs,” IEEE Trans. Softw. Eng., vol. 41, no. 12, pp. 1236–1256, 2015.
[3]C. E. Jimenez, J. Yang, A. Wettig, S. Yao, K. Pei, O. Press, and K. Narasimhan, “SWE-bench: Can language models resolve real-world GitHub issues?” in Proc. ICLR, 2024.
[4]M. Chen et al., “Evaluating large language models trained on code,” arXiv:2107.03374, 2021.
[5]E. K. Smith, E. T. Barr, C. Le Goues, and Y. Brun, “Is the cure worse than the disease? Overfitting in automated program repair,” in Proc. ESEC/FSE, 2015, pp. 532–543.
[6]R. A. DeMillo, R. J. Lipton, and F. G. Sayward, “Hints on test data selection: Help for the practicing programmer,” Computer, vol. 11, no. 4, pp. 34–41, 1978.
[7]Y. Jia and M. Harman, “An analysis and survey of the development of mutation testing,” IEEE Trans. Softw. Eng., vol. 37, no. 5, pp. 649–678, 2011.
[8]R. Gupta, S. Pal, A. Kanade, and S. Shevade, “DeepFix: Fixing common C language errors by deep learning,” in Proc. AAAI, vol. 31, no. 1, pp. 1345–1351, 2017.
[9]M. Yasunaga and P. Liang, “Graph-based, self-supervised program repair from diagnostic feedback,” in Proc. ICML, PMLR, vol. 119, pp. 10799–10808, 2020.
[10]F. Zhu, Z. Liu, G. Yang, J. Li, and S. Cheung, “EqFix: Fixing LaTeX equation errors by examples,” in SETTA 2022, LNCS 13649, pp. 89–109.
[11]K. Wang et al., “TexOCR-Bench: Benchmarking page-image-to-LaTeX reconstruction,” in Proc. 64th ACL, Vol. 1, 2026.
[12]H. Wen, Z. Zhang, and Y. Li, “OverleafCopilot: Empowering academic writing in Overleaf with large language models,” arXiv:2403.09733, 2024.
[13]S. Hou et al., “PaperDebugger: Assisting scientific writing, review, and editing,” in Companion Proc. ACM Web Conf., 2026.
[14]J. Tan, K. Zhang, and X. Chen, “Inconsistencies in TeX-produced documents,” in Proc. ISSTA, 2024.
[15]L. Zheng et al., “Judging LLM-as-a-judge with MT-Bench and Chatbot Arena,” Adv. Neural Inf. Process. Syst., vol. 36, pp. 46595–46623, 2023.
[16]A. Panickssery, S. R. Bowman, and S. Feng, “LLM evaluators recognize and favor their own generations,” Adv. Neural Inf. Process. Syst., vol. 37, 2024.
[17]B. Hui et al., “Qwen2.5-Coder technical report,” arXiv:2409.12186, 2024.
[18]Meta AI, “Llama 3.2 model card,” 2024.
[19]E. Kassis et al., “Agent skills for reproducible research agents,” arXiv:2609.00065, 2026.
成果物は、レビューして適用するまで別のワークスペースに保持されます。
低消費電力の山火事センシングに関する論文を探し、DOI を検証した文献リストを保存してください。
確認したファイルを適用するまで、元のプロジェクトは変わりません。
適用前に、選択した各ファイルをプレビューできます。
research/reading-list.md追加プレビュー+ # Wildfire sensing: reading list + + ## Satellite fire detection + Giglio et al. (2003). An Enhanced Contextual Fire + Detection Algorithm for MODIS. + DOI: 10.1016/S0034-4257(03)00184-6 + + Use: background on satellite detection methods. + Check separately: claims about ground-sensor energy use.
Attention
\definecolor{c0F172A}{HTML}{0F172A}\definecolor{c1E293B}{HTML}{1E293B}\definecolor{cC7C7CC}{HTML}{C7C7CC}\definecolor{cCDEDD0}{HTML}{CDEDD0}\definecolor{cCFE8F8}{HTML}{CFE8F8}\definecolor{cDAD2F0}{HTML}{DAD2F0}\definecolor{cE9E9EC}{HTML}{E9E9EC}\definecolor{cEEF2C3}{HTML}{EEF2C3}\definecolor{cF9D7D9}{HTML}{F9D7D9}\definecolor{cFDE3C7}{HTML}{FDE3C7}\definecolor{cFFFFFF}{HTML}{FFFFFF}\begin{tikzpicture}[>={Triangle[length=0.313cm,width=0.313cm]}] \node (n1_mds37) at (6.25,-21.75) [text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1cm] {Inputs}; \node (n2_hnw3j) at (6.25,-20.075) [draw=c1E293B, line width=0.025cm, fill=cF9D7D9, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Input Embedding}; \node (n3_x9vjf) at (4.25,-18.175) [circle, draw=c1E293B, line width=0.025cm, fill=cFFFFFF, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=0.85cm, minimum height=0.85cm] {}; \node (n4_aa0b6) at (6.25,-18.175) [circle, draw=c1E293B, line width=0.025cm, fill=cFFFFFF, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=0.85cm, minimum height=0.85cm] {+}; \node (n5_lbeum) at (2.625,-19.375) [text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=3.5cm, minimum height=1cm] {Positional Encoding}; \node (n6_gr85r) at (6.25,-16.325) [draw=c1E293B, line width=0.025cm, fill=cFDE3C7, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Multi-Head Attention}; \node (n7_it3d0) at (6.25,-14.575) [draw=c1E293B, line width=0.025cm, fill=cEEF2C3, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Add \& Norm}; \node (n8_0ae9p) at (6.25,-12.575) [draw=c1E293B, line width=0.025cm, fill=cCFE8F8, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Feed Forward}; \node (n9_31jhg) at (6.25,-10.825) [draw=c1E293B, line width=0.025cm, fill=cEEF2C3, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Add \& Norm}; \node (n11_3mv5b) at (1.875,-13.575) [text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=1.25cm, minimum height=0.75cm] {N×}; \node (n12_y6hil) at (16.25,-21.75) [text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1cm] {Outputs (shifted right)}; \node (n13_oukbf) at (16.25,-20.075) [draw=c1E293B, line width=0.025cm, fill=cF9D7D9, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Output Embedding}; \node (n14_e6m10) at (16.25,-18.175) [circle, draw=c1E293B, line width=0.025cm, fill=cFFFFFF, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=0.85cm, minimum height=0.85cm] {+}; \node (n15_te7fn) at (18.25,-18.175) [circle, draw=c1E293B, line width=0.025cm, fill=cFFFFFF, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=0.85cm, minimum height=0.85cm] {}; \node (n16_otz7n) at (19.875,-19.375) [text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=3.5cm, minimum height=1cm] {Positional Encoding}; \node (n17_nw4kz) at (16.25,-16.325) [draw=c1E293B, line width=0.025cm, fill=cFDE3C7, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Masked Multi-Head Attention}; \node (n18_feep8) at (16.25,-14.575) [draw=c1E293B, line width=0.025cm, fill=cEEF2C3, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Add \& Norm}; \node (n19_9lw0g) at (16.25,-12.575) [draw=c1E293B, line width=0.025cm, fill=cFDE3C7, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Multi-Head Attention}; \node (n20_lz6h6) at (16.25,-10.825) [draw=c1E293B, line width=0.025cm, fill=cEEF2C3, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Add \& Norm}; \node (n21_iyi8d) at (16.25,-8.825) [draw=c1E293B, line width=0.025cm, fill=cCFE8F8, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Feed Forward}; \node (n22_hapki) at (16.25,-7.075) [draw=c1E293B, line width=0.025cm, fill=cEEF2C3, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Add \& Norm}; \node (n24_qwbl3) at (19.375,-11.825) [text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=1.25cm, minimum height=0.75cm] {N×}; \node (n25_isnp1) at (16.25,-4.8) [draw=c1E293B, line width=0.025cm, fill=cDAD2F0, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.1cm] {Linear}; \node (n26_ggail) at (16.25,-2.8) [draw=c1E293B, line width=0.025cm, fill=cCDEDD0, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.1cm] {Softmax}; \node (n27_76g5v) at (16.25,-0.875) [text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.5cm, minimum height=1.25cm] {Output Probabilities}; \begin{scope}[on background layer] \node (n10_ma9el) at (6.25,-13.575) [draw=cC7C7CC, line width=0.025cm, fill=cE9E9EC, rounded corners=0.4cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=5.5cm, minimum height=7.65cm] {}; \node (n23_egiii) at (16.25,-11.7) [draw=cC7C7CC, line width=0.025cm, fill=cE9E9EC, rounded corners=0.4cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=5.5cm, minimum height=11.4cm] {}; \draw[->, line width=0.05cm, rounded corners=0.125cm] (6.25,-21.25) -- (6.25,-20.75) -- (6.25,-21.15) -- (6.25,-20.65); \draw[->, line width=0.05cm, rounded corners=0.125cm] (6.25,-19.5) -- (6.25,-19) -- (6.25,-19.1) -- (6.25,-18.6); \draw[->, line width=0.05cm] (n3_x9vjf.east) to[out=0, in=180] (n4_aa0b6.west); \draw[->, line width=0.05cm, rounded corners=0.125cm] (6.25,-17.75) -- (6.25,-17.25) -- (6.25,-17.4) -- (6.25,-16.9); \draw[->, line width=0.05cm, rounded corners=0.125cm] (6.25,-15.75) -- (6.25,-15.25) -- (6.25,-15.65) -- (6.25,-15.15); \draw[->, line width=0.05cm, rounded corners=0.125cm] (6.25,-14) -- (6.25,-13.5) -- (6.25,-13.65) -- (6.25,-13.15); \draw[->, line width=0.05cm, rounded corners=0.125cm] (6.25,-12) -- (6.25,-11.5) -- (6.25,-11.9) -- (6.25,-11.4); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.25,-21.25) -- (16.25,-20.75) -- (16.25,-21.15) -- (16.25,-20.65); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.25,-19.5) -- (16.25,-19) -- (16.25,-19.1) -- (16.25,-18.6); \draw[->, line width=0.05cm] (n15_te7fn.west) to[out=180, in=0] (n14_e6m10.east); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.25,-17.75) -- (16.25,-17.25) -- (16.25,-17.4) -- (16.25,-16.9); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.25,-15.75) -- (16.25,-15.25) -- (16.25,-15.65) -- (16.25,-15.15); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.25,-14) -- (16.25,-13.5) -- (16.25,-13.65) -- (16.25,-13.15); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.25,-12) -- (16.25,-11.5) -- (16.25,-11.9) -- (16.25,-11.4); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.25,-10.25) -- (16.25,-9.75) -- (16.25,-9.9) -- (16.25,-9.4); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.25,-8.25) -- (16.25,-7.75) -- (16.25,-8.15) -- (16.25,-7.65); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.25,-6.5) -- (16.25,-6) -- (16.25,-5.925) -- (16.25,-5.85) -- (16.25,-5.35); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.25,-4.25) -- (16.25,-3.75) -- (16.25,-3.85) -- (16.25,-3.35); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.25,-2.25) -- (16.25,-1.75) -- (16.25,-2) -- (16.25,-1.5); \draw[->, line width=0.05cm, rounded corners=0.125cm] (8.375,-10.825) -- (8.875,-10.825) -- (11.25,-10.825) -- (11.25,-12.575) -- (13.625,-12.575) -- (14.125,-12.575); \draw[->, line width=0.05cm, rounded corners=0.125cm] (5.825,-18.175) -- (5.325,-18.175) -- (3.625,-18.175) -- (3.625,-14.575) -- (4.125,-14.575); \draw[->, line width=0.05cm, rounded corners=0.125cm] (4.125,-14.575) -- (4.1,-14.575) -- (3.625,-14.575) -- (3.625,-10.825) -- (4.125,-10.825); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.675,-18.175) -- (17.175,-18.175) -- (18.875,-18.175) -- (18.875,-14.575) -- (18.375,-14.575); \draw[->, line width=0.05cm, rounded corners=0.125cm] (18.375,-14.575) -- (18.875,-14.575) -- (18.875,-10.825) -- (18.4,-10.825) -- (18.375,-10.825); \draw[->, line width=0.05cm, rounded corners=0.125cm] (18.375,-10.825) -- (18.875,-10.825) -- (18.875,-7.075) -- (18.4,-7.075) -- (18.375,-7.075); \end{scope}\end{tikzpicture}Attention
\definecolor{c0F172A}{HTML}{0F172A}\definecolor{c1E293B}{HTML}{1E293B}\definecolor{cC7C7CC}{HTML}{C7C7CC}\definecolor{cCDEDD0}{HTML}{CDEDD0}\definecolor{cCFE8F8}{HTML}{CFE8F8}\definecolor{cDAD2F0}{HTML}{DAD2F0}\definecolor{cE9E9EC}{HTML}{E9E9EC}\definecolor{cEEF2C3}{HTML}{EEF2C3}\definecolor{cF9D7D9}{HTML}{F9D7D9}\definecolor{cFDE3C7}{HTML}{FDE3C7}\definecolor{cFFFFFF}{HTML}{FFFFFF}\begin{tikzpicture}[>={Triangle[length=0.313cm,width=0.313cm]}] \node (n1_mds37) at (6.25,-21.75) [text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1cm] {Inputs}; \node (n2_hnw3j) at (6.25,-20.075) [draw=c1E293B, line width=0.025cm, fill=cF9D7D9, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Input Embedding}; \node (n3_x9vjf) at (4.25,-18.175) [circle, draw=c1E293B, line width=0.025cm, fill=cFFFFFF, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=0.85cm, minimum height=0.85cm] {}; \node (n4_aa0b6) at (6.25,-18.175) [circle, draw=c1E293B, line width=0.025cm, fill=cFFFFFF, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=0.85cm, minimum height=0.85cm] {+}; \node (n5_lbeum) at (2.625,-19.375) [text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=3.5cm, minimum height=1cm] {Positional Encoding}; \node (n6_gr85r) at (6.25,-16.325) [draw=c1E293B, line width=0.025cm, fill=cFDE3C7, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Multi-Head Attention}; \node (n7_it3d0) at (6.25,-14.575) [draw=c1E293B, line width=0.025cm, fill=cEEF2C3, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Add \& Norm}; \node (n8_0ae9p) at (6.25,-12.575) [draw=c1E293B, line width=0.025cm, fill=cCFE8F8, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Feed Forward}; \node (n9_31jhg) at (6.25,-10.825) [draw=c1E293B, line width=0.025cm, fill=cEEF2C3, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Add \& Norm}; \node (n11_3mv5b) at (1.875,-13.575) [text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=1.25cm, minimum height=0.75cm] {N×}; \node (n12_y6hil) at (16.25,-21.75) [text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1cm] {Outputs (shifted right)}; \node (n13_oukbf) at (16.25,-20.075) [draw=c1E293B, line width=0.025cm, fill=cF9D7D9, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Output Embedding}; \node (n14_e6m10) at (16.25,-18.175) [circle, draw=c1E293B, line width=0.025cm, fill=cFFFFFF, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=0.85cm, minimum height=0.85cm] {+}; \node (n15_te7fn) at (18.25,-18.175) [circle, draw=c1E293B, line width=0.025cm, fill=cFFFFFF, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=0.85cm, minimum height=0.85cm] {}; \node (n16_otz7n) at (19.875,-19.375) [text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=3.5cm, minimum height=1cm] {Positional Encoding}; \node (n17_nw4kz) at (16.25,-16.325) [draw=c1E293B, line width=0.025cm, fill=cFDE3C7, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Masked Multi-Head Attention}; \node (n18_feep8) at (16.25,-14.575) [draw=c1E293B, line width=0.025cm, fill=cEEF2C3, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Add \& Norm}; \node (n19_9lw0g) at (16.25,-12.575) [draw=c1E293B, line width=0.025cm, fill=cFDE3C7, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Multi-Head Attention}; \node (n20_lz6h6) at (16.25,-10.825) [draw=c1E293B, line width=0.025cm, fill=cEEF2C3, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Add \& Norm}; \node (n21_iyi8d) at (16.25,-8.825) [draw=c1E293B, line width=0.025cm, fill=cCFE8F8, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Feed Forward}; \node (n22_hapki) at (16.25,-7.075) [draw=c1E293B, line width=0.025cm, fill=cEEF2C3, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.15cm] {Add \& Norm}; \node (n24_qwbl3) at (19.375,-11.825) [text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=1.25cm, minimum height=0.75cm] {N×}; \node (n25_isnp1) at (16.25,-4.8) [draw=c1E293B, line width=0.025cm, fill=cDAD2F0, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.1cm] {Linear}; \node (n26_ggail) at (16.25,-2.8) [draw=c1E293B, line width=0.025cm, fill=cCDEDD0, rounded corners=0.1cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.25cm, minimum height=1.1cm] {Softmax}; \node (n27_76g5v) at (16.25,-0.875) [text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=4.5cm, minimum height=1.25cm] {Output Probabilities}; \begin{scope}[on background layer] \node (n10_ma9el) at (6.25,-13.575) [draw=cC7C7CC, line width=0.025cm, fill=cE9E9EC, rounded corners=0.4cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=5.5cm, minimum height=7.65cm] {}; \node (n23_egiii) at (16.25,-11.7) [draw=cC7C7CC, line width=0.025cm, fill=cE9E9EC, rounded corners=0.4cm, text=c0F172A, font=\rmfamily\fontsize{10}{12}\selectfont, inner sep=0pt, outer sep=0pt, minimum width=5.5cm, minimum height=11.4cm] {}; \draw[->, line width=0.05cm, rounded corners=0.125cm] (6.25,-21.25) -- (6.25,-20.75) -- (6.25,-21.15) -- (6.25,-20.65); \draw[->, line width=0.05cm, rounded corners=0.125cm] (6.25,-19.5) -- (6.25,-19) -- (6.25,-19.1) -- (6.25,-18.6); \draw[->, line width=0.05cm] (n3_x9vjf.east) to[out=0, in=180] (n4_aa0b6.west); \draw[->, line width=0.05cm, rounded corners=0.125cm] (6.25,-17.75) -- (6.25,-17.25) -- (6.25,-17.4) -- (6.25,-16.9); \draw[->, line width=0.05cm, rounded corners=0.125cm] (6.25,-15.75) -- (6.25,-15.25) -- (6.25,-15.65) -- (6.25,-15.15); \draw[->, line width=0.05cm, rounded corners=0.125cm] (6.25,-14) -- (6.25,-13.5) -- (6.25,-13.65) -- (6.25,-13.15); \draw[->, line width=0.05cm, rounded corners=0.125cm] (6.25,-12) -- (6.25,-11.5) -- (6.25,-11.9) -- (6.25,-11.4); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.25,-21.25) -- (16.25,-20.75) -- (16.25,-21.15) -- (16.25,-20.65); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.25,-19.5) -- (16.25,-19) -- (16.25,-19.1) -- (16.25,-18.6); \draw[->, line width=0.05cm] (n15_te7fn.west) to[out=180, in=0] (n14_e6m10.east); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.25,-17.75) -- (16.25,-17.25) -- (16.25,-17.4) -- (16.25,-16.9); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.25,-15.75) -- (16.25,-15.25) -- (16.25,-15.65) -- (16.25,-15.15); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.25,-14) -- (16.25,-13.5) -- (16.25,-13.65) -- (16.25,-13.15); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.25,-12) -- (16.25,-11.5) -- (16.25,-11.9) -- (16.25,-11.4); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.25,-10.25) -- (16.25,-9.75) -- (16.25,-9.9) -- (16.25,-9.4); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.25,-8.25) -- (16.25,-7.75) -- (16.25,-8.15) -- (16.25,-7.65); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.25,-6.5) -- (16.25,-6) -- (16.25,-5.925) -- (16.25,-5.85) -- (16.25,-5.35); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.25,-4.25) -- (16.25,-3.75) -- (16.25,-3.85) -- (16.25,-3.35); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.25,-2.25) -- (16.25,-1.75) -- (16.25,-2) -- (16.25,-1.5); \draw[->, line width=0.05cm, rounded corners=0.125cm] (8.375,-10.825) -- (8.875,-10.825) -- (11.25,-10.825) -- (11.25,-12.575) -- (13.625,-12.575) -- (14.125,-12.575); \draw[->, line width=0.05cm, rounded corners=0.125cm] (5.825,-18.175) -- (5.325,-18.175) -- (3.625,-18.175) -- (3.625,-14.575) -- (4.125,-14.575); \draw[->, line width=0.05cm, rounded corners=0.125cm] (4.125,-14.575) -- (4.1,-14.575) -- (3.625,-14.575) -- (3.625,-10.825) -- (4.125,-10.825); \draw[->, line width=0.05cm, rounded corners=0.125cm] (16.675,-18.175) -- (17.175,-18.175) -- (18.875,-18.175) -- (18.875,-14.575) -- (18.375,-14.575); \draw[->, line width=0.05cm, rounded corners=0.125cm] (18.375,-14.575) -- (18.875,-14.575) -- (18.875,-10.825) -- (18.4,-10.825) -- (18.375,-10.825); \draw[->, line width=0.05cm, rounded corners=0.125cm] (18.375,-10.825) -- (18.875,-10.825) -- (18.875,-7.075) -- (18.4,-7.075) -- (18.375,-7.075); \end{scope}\end{tikzpicture}Attention
Attention
@article{venkateshmurthy2026etb, author = {Venkateshmurthy, Prajwal S.}, title = {Engine-Transfer-Bench: An Evidence-Based Benchmark for Document Compilation Engine Selection}, journal = {arXiv preprint}, year = 2026, eprint = {2608.18329}, }
LaTeX (latexmk) · main.tex
9/13/2026, 4:57:36 PM
7 件のファイル · 183.8 KB · ded1c2ae
LaTeX (latexmk) · main.tex
9/13/2026, 3:52:03 PM
7 件のファイル · 183.8 KB · 157c1ffb
LaTeX (latexmk) · main.tex
9/6/2026, 4:22:40 PM
7 件のファイル · 183.7 KB · 891b7ee7
絞り込みはプロジェクトの棚にすぐ反映されます
Senior Software Engineer (L5) with 9+ years designing and operating large-scale distributed systems. Deep experience in backend infrastructure, performance, and reliability.
- Tech lead for a Search serving component handling 2M+ queries/second; cut p99 latency 38%.
- Designed a globally replicated feature store on Spanner backing 40+ ML models.
- Led migration of a 300-service fleet to a new RPC framework; reduced on-call pages 45%.
- Mentored six engineers and ran the team’s design-review program.
- Built a real-time aggregation pipeline processing 8B events/day.
- Cut batch-job cost 30% with sharding and incremental computation.
- Shipped ledger and reconciliation services processing $60B+/year.
- Reduced a reconciliation run from six hours to 25 minutes.
Go, Raft, gRPC — distributed rate limiter doing 4M+ decisions/sec/node.
Rust — typed query builder for Postgres with compile-time-checked SQL.
Languages: C++, Go, Rust, Python, Java, SQL
Systems: Spanner, Bigtable, Kubernetes, Kafka, gRPC / Protobuf, Redis
この原稿の始め方を選べます。どの部分も、後から自由に変更できます。

節構成、資料、レビューノートを備えた研究フォルダと、研究問いを定義する最初のタスク。

手元にある原稿を続けます。アーカイブ、Word や Markdown のドラフト、GitHub リポジトリなど。

学術論文・学位論文・レポート・ポスター・講演用のレイアウトから始めます。
Data scientist focused on trustworthy machine learning, experimentation, and decision systems used by product and research teams.
- Built evaluation systems for large language models across safety and product quality.
- Designed experiments used to guide high-impact model launches.
- Developed ranking models and reliable offline evaluation pipelines.
- Partnered with product teams to improve marketplace search quality.
- Created retention models and executive experimentation dashboards.
Open evaluation templates for production ML systems.
Python package for reproducible causal inference workflows.
Languages: Python, R, SQL, PyTorch, JAX
Systems: Spark, dbt, BigQuery, Airflow, MLflow, Kubernetes
Data scientist focused on trustworthy machine learning, experimentation, and decision systems used by product and research teams.
- Built evaluation systems for large language models across safety and product quality.
- Designed experiments used to guide high-impact model launches.
- Developed ranking models and reliable offline evaluation pipelines.
- Partnered with product teams to improve marketplace search quality.
- Created retention models and executive experimentation dashboards.
Open evaluation templates for production ML systems.
Python package for reproducible causal inference workflows.
Languages: Python, R, SQL, PyTorch, JAX
Systems: Spark, dbt, BigQuery, Airflow, MLflow, Kubernetes
Senior Software Engineer (L5) with 9+ years designing and operating large-scale distributed systems. Deep experience in backend infrastructure, performance, and reliability.
- Tech lead for a Search serving component handling 2M+ queries/second; cut p99 latency 38%.
- Designed a globally replicated feature store on Spanner backing 40+ ML models.
- Led migration of a 300-service fleet to a new RPC framework; reduced on-call pages 45%.
- Mentored six engineers and ran the team’s design-review program.
- Built a real-time aggregation pipeline processing 8B events/day.
- Cut batch-job cost 30% with sharding and incremental computation.
- Shipped ledger and reconciliation services processing $60B+/year.
- Reduced a reconciliation run from six hours to 25 minutes.
Go, Raft, gRPC — distributed rate limiter doing 4M+ decisions/sec/node.
Rust — typed query builder for Postgres with compile-time-checked SQL.
Languages: C++, Go, Rust, Python, Java, SQL
Systems: Spanner, Bigtable, Kubernetes, Kafka, gRPC / Protobuf, Redis
Product engineer bridging design systems and frontend infrastructure to build accessible, high-craft tools for creative teams.
- Led architecture for collaborative prototyping workflows used by millions.
- Created an accessible component platform shared across six product teams.
- Shipped core editor interactions and improved canvas rendering performance 42%.
- Partnered with design to establish product-wide interaction standards.
- Prototyped service experiences for health and education clients.
Open-source accessible color and typography toolkit.
Patterns for resilient collaborative interfaces.
Languages: TypeScript, React, Rust, Swift, Figma
Systems: WebGL, Canvas, design systems, accessibility, prototyping
Product engineer bridging design systems and frontend infrastructure to build accessible, high-craft tools for creative teams.
- Led architecture for collaborative prototyping workflows used by millions.
- Created an accessible component platform shared across six product teams.
- Shipped core editor interactions and improved canvas rendering performance 42%.
- Partnered with design to establish product-wide interaction standards.
- Prototyped service experiences for health and education clients.
Open-source accessible color and typography toolkit.
Patterns for resilient collaborative interfaces.
Languages: TypeScript, React, Rust, Swift, Figma
Systems: WebGL, Canvas, design systems, accessibility, prototyping
Research engineer building fast, expressive systems for scientific communication and reproducible technical publishing.
- Built incremental layout and diagnostics for a modern typesetting engine.
- Improved large-document render latency and editor feedback loops.
- Worked on text shaping, browser layout, and developer tooling.
- Published work on interactive document systems.
A small language server for technical documents.
Experiments in high-performance text layout.
Languages: Rust, C++, TypeScript, Python
Systems: Compilers, text layout, language servers, WebAssembly
\documentclass[11pt,letterpaper]{article}\usepackage[T1]{fontenc}\usepackage[margin=0.5in]{geometry}\usepackage{titlesec}\usepackage{enumitem}\usepackage{hyperref}% ATS-friendly: single column, real selectable text, no tables-for-layout,% embedded subset fonts. Linear reading order so parsers extract cleanly.\setlength{\parindent}{0pt}\pagenumbering{gobble}\hypersetup{colorlinks=true, urlcolor=black, linkcolor=black}\titleformat{\section}{\large\bfseries\uppercase}{}{0em}{}[\vspace{2pt}\titlerule]\titlespacing*{\section}{0pt}{8pt}{4pt}\setlist[itemize]{leftmargin=14pt, itemsep=1pt, topsep=2pt, parsep=0pt}% role{Title}{Company}{Location}{Dates}\newcommand{\role}[4]{% \textbf{#1} \hfill #2 \\ \textit{#3} \hfill \textit{#4}%}\begin{document}\begin{center} {\Huge \textbf{Alex Chen}}\\[3pt] \small Senior Software Engineer\\[2pt] \href{mailto:alex.chen@gmail.com}{alex.chen@gmail.com}\,$\cdot$\, (650) 555-0142\,$\cdot$\, Mountain View, CA\,$\cdot$\, \href{https://alexchen.dev}{alexchen.dev}\,$\cdot$\, \href{https://github.com/alexchen}{github.com/alexchen}\,$\cdot$\, \href{https://linkedin.com/in/alexchen}{linkedin.com/in/alexchen}\end{center}\vspace{2pt}\section*{Summary}Senior Software Engineer (L5) with 9+ years designing and operating large-scaledistributed systems. Deep experience in backend infrastructure, performance, andreliability, with a track record of shipping products used by hundreds ofmillions of users and mentoring engineers toward senior roles.\section*{Experience}\role{Senior Software Engineer (L5)}{Google}{Mountain View, CA}{Mar 2020 -- Present}\begin{itemize} \item Tech lead for a Search serving component handling 2M+ queries/second; drove a redesign that cut p99 latency 38\% and saved an estimated \$14M/year in compute. \item Designed and launched a globally-replicated feature store on Spanner backing 40+ ML models, adopted by 12 teams across Search and Ads. \item Led migration of a 300-service fleet to a new RPC framework, improving tail latency and reducing on-call pages by 45\%. \item Mentored 6 engineers (2 promoted to senior); ran the team's design-review and readability programs.\end{itemize}\vspace{3pt}\role{Software Engineer (L4)}{Google}{Mountain View, CA}{Jul 2017 -- Mar 2020}\begin{itemize} \item Built a real-time aggregation pipeline (C++, Flume) processing 8B events/day for a Search-quality dashboard used org-wide. \item Cut batch-job cost 30\% by reworking sharding and introducing incremental recomputation.\end{itemize}\vspace{3pt}\role{Software Engineer}{Stripe}{San Francisco, CA}{Aug 2015 -- Jun 2017}\begin{itemize} \item Shipped core ledger and reconciliation services for a payments platform processing \$60B+/year. \item Reduced a reconciliation run from 6 hours to 25 minutes via parallelization and a columnar store.\end{itemize}\section*{Selected Projects}\textbf{Ratel} \hfill \href{https://github.com/alexchen/ratel}{github.com/alexchen/ratel} \\\textit{Go, Raft, gRPC} --- open-source distributed rate limiter doing 4M+ decisions/sec/node; 1.5k GitHub stars.\par\vspace{4pt}\textbf{tql} \hfill \href{https://github.com/alexchen/tql}{github.com/alexchen/tql} \\\textit{Rust} --- a typed query builder for Postgres with compile-time-checked SQL.\section*{Education}\textbf{M.S. Computer Science} \hfill Stanford University \\\textit{2013 -- 2015} \hfill \textit{Focus: Distributed Systems}\par\vspace{4pt}\textbf{B.S. Computer Science} \hfill University of Illinois Urbana-Champaign \\\textit{2009 -- 2013} \hfill \textit{GPA: 3.9 / 4.0}\section*{Skills}\textbf{Languages:} C++, Go, Rust, Python, Java, SQL \\\textbf{Systems:} Spanner, Bigtable, Kubernetes, Kafka, gRPC / Protobuf, Redis \\\textbf{Focus:} Distributed systems, performance, reliability (SLOs), system design, mentoring\end{document}Senior Software Engineer (L5) with 9+ years designing and operating large-scale distributed systems. Deep experience in backend infrastructure, performance, and reliability.
- Tech lead for a Search serving component handling 2M+ queries/second; cut p99 latency 38%.
- Designed a globally replicated feature store on Spanner backing 40+ ML models.
- Led migration of a 300-service fleet to a new RPC framework; reduced on-call pages 45%.
- Mentored six engineers and ran the team’s design-review program.
- Built a real-time aggregation pipeline processing 8B events/day.
- Cut batch-job cost 30% with sharding and incremental computation.
- Shipped ledger and reconciliation services processing $60B+/year.
- Reduced a reconciliation run from six hours to 25 minutes.
Go, Raft, gRPC — distributed rate limiter doing 4M+ decisions/sec/node.
Rust — typed query builder for Postgres with compile-time-checked SQL.
Languages: C++, Go, Rust, Python, Java, SQL
Systems: Spanner, Bigtable, Kubernetes, Kafka, gRPC / Protobuf, Redis
Results
Claude Sonnet 5, GPT-5.6 Sol, and Grok 4.5 each recover 85 of 86 inputs, yet their normalized exact-match counts are 52, 66, and 59 just2014defects4j.
Version 0.2 results on 86 distinct hard-track inputs. CR is intention-to-treat.
| System | CR | CR % | NEM | Fail |
| Identity | 0/86 | 0.0 | 0/86 | 0 |
| Rule | 34/86 | 39.5 | 28/86 | 0 |
| Qwen-7B + fb | 57/86 | 66.3 | 17/86 | 0 |
| MiniMax M3 | 75/86 | 87.2 | 50/86 | 2 |
| DeepSeek V4 | 81/86 | 94.2 | 38/86 | 2 |
| Gemini 3.5 | 82/86 | 95.3 | 26/86 | 0 |
| Claude S5 | 85/86 | 98.8 | 52/86 | 0 |
| GPT-5.6 Sol | 85/86 | 98.8 | 66/86 | 1 |
| Grok 4.5 | 85/86 | 98.8 | 59/86 | 0 |
Evaluation method
Compile Recovery requires a successful Tectonic 0.17.0 run and at least 0.80 token-level LCS similarity between text extracted from the candidate and reference PDFs. Normalized exact match sits beside it, because compilation alone cannot separate a faithful repair from a deletion.
Discussion and limitations
These results show why compilation and edit precision should be reported together, but they do not establish a universal model ranking jimenez2024swebench.
Every generated row passes an engine gate before it is retained, and duplicate broken sources are removed by SHA-256 so that no input is scored twice.
Conclusion
The contribution is an auditable task definition, an executable oracle, a fixed cohort, and a replayable candidate ledger.
- 言語解析現在のプロジェクトリビジョンを解析しました
- コンパイル中PDF 出力を生成して検証しています
- PDF を描画中検証済みのコンパイル結果を待っています
Single-Fault LATEX Compilation Repair
Independent Researcher
San Jose, CA, USA
Abstract—Compilation repair for LaTeX is easy to score badly. A candidate may compile after deleting or hiding content, while exact source equality rejects valid alternative repairs. We present TeXFix-Bench, a controlled benchmark for repairing complete, broken LaTeX sources under a pinned engine. The generator applies 12 deterministic single-fault operators to 13 hand-authored seed documents. It retains 627 engine-validated rows, comprising 300 unique hard-track inputs and 67 unique warning-only inputs after hash deduplication.
Index Terms—automated program repair, LaTeX, benchmark, compilation, large language models, reproducibility
LaTeX compilation failures are a practical target for automated repair. A missing delimiter or misspelled control sequence can prevent a complete document from building, and the first reported diagnostic may be distant from the underlying fault. LLM-assisted writing systems now operate inside LaTeX editors , but their publications do not provide a public, engine-pinned evaluation of compilation-failure repair.
Program repair benchmarks pair a defect with an executable oracle and a fixed harness . TeXFix-Bench studies a narrower contract: a broken source document in, a repaired full source out, under a specified engine.
TexOCR-Bench evaluates page-image-to-LaTeX reconstruction , and EqFix repairs errors in individual equations by synthesizing rules from examples . Overfitting to a weak oracle is a known hazard .
A system receives one broken source file and returns one repaired source file. The engine, its version, and the build command are fixed for every attempt.
Every generated row passes an engine gate before it is retained, and duplicate broken sources are removed by SHA-256 so that no input is scored twice .
Compile Recovery requires a successful Tectonic 0.17.0 run and at least 0.80 token-level LCS similarity between text extracted from the candidate and reference PDFs. Normalized exact match sits beside it, because compilation alone cannot separate a faithful repair from a deletion .
Version 0.2 results on 86 distinct hard-track inputs. CR is intention-to-treat.
| System | CR | CR % | NEM | Fail |
| Identity | 0/86 | 0.0 | 0/86 | 0 |
| Rule | 34/86 | 39.5 | 28/86 | 0 |
| Qwen-7B + fb | 57/86 | 66.3 | 17/86 | 0 |
| MiniMax M3 | 75/86 | 87.2 | 50/86 | 2 |
| DeepSeek V4 | 81/86 | 94.2 | 38/86 | 2 |
| Gemini 3.5 | 82/86 | 95.3 | 26/86 | 0 |
| Claude S5 | 85/86 | 98.8 | 52/86 | 0 |
| GPT-5.6 Sol | 85/86 | 98.8 | 66/86 | 1 |
| Grok 4.5 | 85/86 | 98.8 | 59/86 | 0 |
Claude Sonnet 5, GPT-5.6 Sol, and Grok 4.5 each recover 85 of 86 inputs, yet their normalized exact-match counts are 52, 66, and 59 . Compilation and edit precision must be reported together.
The contribution is an auditable task definition, an executable oracle, a fixed cohort, and a replayable candidate ledger.
[1]R. Just, D. Jalali, and M. D. Ernst, “Defects4J: A database of existing faults to enable controlled testing studies for Java programs,” in Proc. ISSTA, 2014, pp. 437–440.
[2]C. Le Goues, N. Holtschulte, E. K. Smith, Y. Brun, P. Devanbu, S. Forrest, and W. Weimer, “The ManyBugs and IntroClass benchmarks for automated repair of C programs,” IEEE Trans. Softw. Eng., vol. 41, no. 12, pp. 1236–1256, 2015.
[3]C. E. Jimenez, J. Yang, A. Wettig, S. Yao, K. Pei, O. Press, and K. Narasimhan, “SWE-bench: Can language models resolve real-world GitHub issues?” in Proc. ICLR, 2024.
[4]M. Chen et al., “Evaluating large language models trained on code,” arXiv:2107.03374, 2021.
[5]E. K. Smith, E. T. Barr, C. Le Goues, and Y. Brun, “Is the cure worse than the disease? Overfitting in automated program repair,” in Proc. ESEC/FSE, 2015, pp. 532–543.
[6]R. A. DeMillo, R. J. Lipton, and F. G. Sayward, “Hints on test data selection: Help for the practicing programmer,” Computer, vol. 11, no. 4, pp. 34–41, 1978.
[7]Y. Jia and M. Harman, “An analysis and survey of the development of mutation testing,” IEEE Trans. Softw. Eng., vol. 37, no. 5, pp. 649–678, 2011.
[8]R. Gupta, S. Pal, A. Kanade, and S. Shevade, “DeepFix: Fixing common C language errors by deep learning,” in Proc. AAAI, vol. 31, no. 1, pp. 1345–1351, 2017.
[9]M. Yasunaga and P. Liang, “Graph-based, self-supervised program repair from diagnostic feedback,” in Proc. ICML, PMLR, vol. 119, pp. 10799–10808, 2020.
[10]F. Zhu, Z. Liu, G. Yang, J. Li, and S. Cheung, “EqFix: Fixing LaTeX equation errors by examples,” in SETTA 2022, LNCS 13649, pp. 89–109.
[11]K. Wang et al., “TexOCR-Bench: Benchmarking page-image-to-LaTeX reconstruction,” in Proc. 64th ACL, Vol. 1, 2026.
[12]H. Wen, Z. Zhang, and Y. Li, “OverleafCopilot: Empowering academic writing in Overleaf with large language models,” arXiv:2403.09733, 2024.
[13]S. Hou et al., “PaperDebugger: Assisting scientific writing, review, and editing,” in Companion Proc. ACM Web Conf., 2026.
[14]J. Tan, K. Zhang, and X. Chen, “Inconsistencies in TeX-produced documents,” in Proc. ISSTA, 2024.
[15]L. Zheng et al., “Judging LLM-as-a-judge with MT-Bench and Chatbot Arena,” Adv. Neural Inf. Process. Syst., vol. 36, pp. 46595–46623, 2023.
[16]A. Panickssery, S. R. Bowman, and S. Feng, “LLM evaluators recognize and favor their own generations,” Adv. Neural Inf. Process. Syst., vol. 37, 2024.
[17]B. Hui et al., “Qwen2.5-Coder technical report,” arXiv:2409.12186, 2024.
[18]Meta AI, “Llama 3.2 model card,” 2024.
[19]E. Kassis et al., “Agent skills for reproducible research agents,” arXiv:2609.00065, 2026.
このリリースの新機能
同じファイルで、論文を一緒に書く。
共著者とプロジェクトを共有すると、入力に合わせて動く相手のカーソルが、それぞれ名前付きで見えます。コメントは対象の行の横に表示されます。電車で Wi-Fi が切れても、そのまま書き続けてください。再接続すれば編集が反映されます。
サーバーの設定方法


+2
再コンパイル
名前付きカーソル
誰が手法の節を書いていて、誰が表 1 を直しているか、ひと目でわかります。
行に付くコメント
文に質問を付け、直ったら解決済みにできます。
誰がいるかわかる
アバターで、プロジェクトに誰がいて、どのファイルで作業しているかがわかります。
自分たちのサーバーを運用
グループで管理しているマシンに、コマンド 1 つで Oleafly Server をインストールできます。
研究スペース
論文まるごと、ひとつのウィンドウで。
ソース、図、参考文献、コンパイルした PDF がすべてひとつのウィンドウに収まります。アウトラインと構造マップは開いているファイルに合わせて切り替わるので、見出しやラベルをクリックすると、その行へ移動できます。
- エクスプローラー、アウトライン、構造がひとつのサイドバーに入っています
- ラベルや引用をクリックすると、定義箇所へジャンプします
in mammary epithelial cells
Cells read growth factors through a small number of shared kinases, yet they respond to EGF, HGF and IGF-1 with different fates. We imaged ERK activity in 2,184 MCF10A cells with a kinase translocation reporter and found that each ligand produces pulses at a characteristic frequency rather than a characteristic amplitude. Frequency alone identifies the ligand in 91 percent of cells.
1 IntroductionEpidermal growth factor, hepatocyte growth factor and insulin-like growth factor all reach the nucleus through the same RAS–RAF–MEK–ERK module, yet epithelial cells migrate, scatter or grow. How a single kinase carries that distinction has been a long-standing question. Early work in PC-12 cells tied fate to whether ERK activity was transient or sustained.
Live-cell reporters changed the picture. In single cells ERK does not rise and settle; it fires in discrete pulses, and the pulse frequency tracks the dose. Here we ask whether frequency also encodes which growth factor a cell has seen.
We make three contributions. A decoder identifies the ligand from inter-pulse intervals alone. A perturbation screen shows that the code survives mutant RAS. And pulse count, not pulse height, predicts whether a cell enters S phase.
Section 2 describes the reporter and the decoder, and Section 3 discusses what a frequency code means for drugs that target the pathway. Traces, segmentation masks and analysis code are available on request.
We stimulated MCF10A cells with saturating doses of EGF, HGF or IGF-1 and tracked ERK every two minutes (Table 1). After the first spike the responses diverged: EGF drove pulses about every 19 minutes, HGF about every 41, and IGF-1 rarely more than once an hour.
Pulse amplitude overlapped almost completely between ligands, so we trained a decoder on inter-pulse intervals alone. Given the first two hours of a single cell’s trace, it named the ligand correctly in 91 percent of held-out cells.
Mutant RAS rescales this code rather than erasing it, so the frequency channel survives oncogenic signalling.
2.3 Sustained pulsing predicts S-phase entryCells that kept pulsing through hour eight were far more likely to enter S phase. Entry tracked how many pulses a cell fired rather than how tall they were, and blocking the receptor early removed the effect.
The same cells, stimulated with a constant dose, fired fewer pulses and entered S phase less often.
Because identity sits in the timing of pulses and not in their height, one cascade can serve many ligands at once. A cell does not need a separate kinase for each growth factor; it needs a way to read how often ERK fires.
The code is also robust. Mutant RAS shifts the pulse rates but keeps the ligands apart, which suggests that a downstream reader of frequency, rather than of level, decides what the cell does next.
We expect the same logic to hold in other receptor tyrosine kinase pathways, and we have begun to test it in cells that express other reporters.
Two limits are worth stating. We worked in one epithelial cell line, and the decoder was trained on the first two hours of each trace, so longer recordings may separate the ligands even better.
We thank the imaging facility for help with the microscopes and our reviewers for pressing us on the decoder. This work was supported by the Northbridge Institute.
References[1] Regot, S., Hughey, J. J., Bajar, B. T., Carrasco, S. and Covert, M. W. High-sensitivity measurements of multiple kinase activities in live single cells. Cell 157, 1724–1734 (2014).
[2] Gillies, T. E., Pargett, M., Silva, J. M., Teragawa, C. K., McCann, C. and Albeck, J. G. Oncogenic mutant RAS signaling activity is rescaled by the ERK/MAPK pathway. Mol. Syst. Biol. 16, e9518 (2020).
[3] Albeck, J. G., Mills, G. B. and Brugge, J. S. Frequency-modulated pulses of ERK activity transmit quantitative proliferation signals. Mol. Cell 49, 249–261 (2013).
[4] Aoki, K., Kumagai, Y., Sakurai, A., Komatsu, N., Fujita, Y., Shionyu, C. and Matsuda, M. Stochastic ERK activation induced by noise and cell-to-cell propagation regulates cell density-dependent proliferation. Mol. Cell 52, 529–540 (2013).
リアルタイムコメント
文のすぐ隣で、その文について質問できます。
数語を選択して「コメントを追加」を選びます。@ を入力すると共著者を呼び出せます。返信は文章の横のスレッドに残り、質問に答えが出たら「解決」でスレッドを片付けられます。
- 周囲の文章が動いても、スレッドは元の位置に付いたままです
- 解決済みのスレッドは、必要になればワンクリックで戻せます

再コンパイル
提案: 編集内容は提案になり、所有者または編集者が承認します
提案モード
「編集」から「提案」に切り替えると、あなたの編集が、変更履歴付きの挿入と削除として表示されます。共著者はそれぞれを承認または却下でき、アシスタントの編集を提案として受け取ることもできます。

再コンパイル
プロジェクトチャット
共有プロジェクトにはそれぞれ論文の横に専用のチャットがあるので、草稿を離れずに、図について共著者に質問できます。
このプロジェクトの全員に対して、ファイルが 2026/11/07 11:20 時点の状態に戻ります。現在のテキストは履歴に残るため、あとで戻すこともできます。
共有の履歴
共有プロジェクトでは、誰がいつ何を変更したかを確認し、大事なバージョンに名前を付け、任意の 2 つを比較して、1 つのファイルまたはプロジェクト全体を復元できます。自分だけのプロジェクトでは、コンパイルが成功するたびに保存されるチェックポイントが同じ役目を果たします。

Epidermal growth factor, hepatocyte growth factor and insulin-like growth factor all reach the nucleus through the same RAS–RAF–MEK–ERK module, yet epithelial cells migrate, scatter or grow. How a single kinase carries that distinction has been a long-standing question [1]. Early work in PC-12 cells tied fate to whether ERK activity was transient or sustained [2].
Live-cell reporters changed the picture. In single cells ERK does not rise and settle; it fires in discrete pulses, and the pulses differ from ligand to ligand [4, 5].
Here we ask whether the timing of those pulses carries the identity of the growth factor. We imaged ERK activity in 2,184 MCF10A cells stimulated with EGF, HGF or IGF-1 and compared the amplitude, width and spacing of every pulse. Each ligand settles into its own rhythm after the first spike and keeps it at every dose we tested, while amplitudes overlap. A decoder that sees only the gaps between pulses names the ligand in most cells.
We stimulated MCF10A cells expressing the ERK kinase translocation reporter [3] with saturating doses of EGF, HGF or IGF-1 and tracked nuclear and cytoplasmic signal every two minutes for four hours. All three ligands produced the same first spike within ten minutes (Figure 1b). After that the responses diverged: EGF drove pulses about every 19 minutes, HGF about every 41, and IGF-1 rarely more than once an hour (Table 1).
2.2 Frequency, not amplitude, identifies the ligandPulse amplitude overlapped almost completely between ligands, so we trained a decoder on the gaps between pulses alone. Given the first two hours of a single cell’s trace, it named the ligand correctly in 91 percent of held-out cells, compared with 47 percent for a decoder that saw only amplitudes.
ブラウザから参加する共著者
サーバーが許可していれば、共著者はブラウザでプロジェクトを開き、編集、コメント、チャット、最新の PDF の閲覧ができます。何を変更できるかは、その人のロールで決まります。
Oleafly Server
共同編集サーバーを自分たちで運用する。
サーバーは、研究室や学科が自前のマシンで動かす単一のプログラムで、プロジェクトはディスクか S3 に保存されます。ユーザーは GitHub、組織の OIDC プロバイダー、またはメールでサインインし、管理コンソールでは、誰が参加できるか、どのプロジェクトがあるか、メール、セキュリティログを扱えます。
- ユーザー、アクセスのルール、サーバーの設定、セキュリティログをひとつのコンソールで
- 自分でホストしたくなければ、ホスト型サーバーをワンクリックで追加できます
プロジェクトの所有者がこれらの人をゲストとして招待しました。ゲストは招待されたプロジェクトだけを見ることができ、共有はできません。
-
A
編集者 承認待ち招待済み 承認却下取り下げamara.okafor@riverton.eduゲストNina TakedaがERK Pulse Frequency Encodes Growth Factor Identityに招待しました · 有効期限: Nov 21, 2026
このサーバーにサインインしたことのあるすべての人です。
新しい人を入れるには、許可するユーザーで追加します。
-
Daniel Hartdaniel@northbridge.org有効 メンバー 端末利用を停止削除 -
Elena Petrovaelena@northbridge.org有効 メンバー 端末利用を停止削除 -
Lucas Moreaulucas@northbridge.org有効 メンバーメンテナー 端末利用を停止削除 -
Nina Takedanina@northbridge.org有効 メンバー 端末利用を停止削除 -
有効 管理者 端末Prajwal自分prajwal@northbridge.org
これらの設定は、このサーバーの全員に適用されます。
このサーバーでのサインイン、端末の変更、管理者の操作の記録です。
- Prajwal → サーバーの設定を変更しましたリンクでの共有を許可: オンNov 7, 2026, 10:42 AM ·開始203.0.113.24
- Prajwal → 役割を変更しましたメンバーからメンテナーへNov 7, 2026, 10:41 AM ·オンLucas Moreau ·開始203.0.113.24
- Prajwal → ゲストの招待を承認しましたプロジェクト: ERK Pulse Frequency Encodes Growth Factor Identity ·役割: 編集者Nov 7, 2026, 10:41 AM ·オンamara.okafor@riverton.edu ·開始203.0.113.24
- Nina Takeda → ゲストを招待しましたプロジェクト: ERK Pulse Frequency Encodes Growth Factor Identity ·役割: 編集者Nov 7, 2026, 9:58 AM ·オンamara.okafor@riverton.edu ·開始198.51.100.7
- Daniel Hart → サインイン済みGitHub で · デバイス: Firefox on LinuxNov 7, 2026, 9:12 AM ·開始198.51.100.31
- Sofia Marín → サインイン済みGitHub で · デバイス: Chrome on WindowsNov 7, 2026, 8:47 AM ·開始198.51.100.58
クラウド同期
執筆に使うどのコンピュータでも、同じライブラリ。
Dropbox、Google Drive、または任意の S3 ストレージにバックアップすると、すべてのプロジェクトのコピーが自分で管理する場所に残ります。別のコンピュータで Oleafly を開けば、ライブラリはもうそこにあります。API キーと AI チャットは、作成したコンピュータにだけ残ります。
- 同期するプロジェクトはコンピュータごとに選べます
- クラウドストレージから削除するときは、必ず先に確認します
-
ERK pulse frequency encodes growth factor identityまだ Dropbox にありません同期済み:たった今アップロード中(9 / 38 ファイル)アップロード中(24 / 38 ファイル)アップロード中(38 / 38 ファイル)2.4 MB
-
TeXFix-Bench: Engine-Grounded Evaluation of Single-Fault LaTeX Compilation Repairまだ Dropbox にありません同期済み:たった今アップロード中(18 / 61 ファイル)アップロード中(42 / 61 ファイル)アップロード中(61 / 61 ファイル)5.1 MB
-
Larkspur: Block-Sparse Attention for Long-Context Inferenceまだ Dropbox にありません同期済み:たった今アップロード中(31 / 120 ファイル)アップロード中(77 / 120 ファイル)アップロード中(120 / 120 ファイル)18 MB
-
Grant Proposal 2027Lab iMac からアップロード中ですDropbox のみ412 KB so far3.2 MB
LaTeX・Typst・Markdown
投稿先が求める形式で書く。
LaTeX は同梱の Tectonic か、自分でインストールした TeX でコンパイルします。Typst には専用のコンパイラが同梱され、Markdown は Pandoc で処理します。アウトライン、構造マップ、ライブプレビューは 3 つとも同じように使えます。
- コンパイラはアプリに付属。TeX のインストールに苦労することはありません
- ツールギャラリーで LaTeX、Typst、Word を相互に変換
ビジュアルモード
編集中に見出し、数式、図、引用がその場でレンダリングされ、表には行、列、結合セルを扱えるグリッドが付きます。.tex ファイルが唯一のコピーのままです。
Typst フォーム
テンプレートの引数がラベル付きの入力欄として表示されるので、表紙や CV の項目を埋めるのにコードを編集する必要はありません。
Quarto と Calepin
論文の中で分析を実行する。
本文の横に R、Python、Julia のコードを書くと、その結果が PDF に入ります。データに合わせて更新される表、数値、図です。Quarto は .qmd と .Rmd ファイルを PDF、Web ページ、スライドにビルドします。Calepin は同じことを Typst の文書の中で行います。
- コードは、そのプロジェクトで許可した後にだけ実行されます
- Quarto と Calepin のテンプレートがギャラリーにあります
このプロジェクトではコードがオフになっているため、この文書のコードは実行されませんでした。プロジェクト内のすべてのファイルを信頼できる場合にのみ、コードを許可してください。
このプロジェクトでコードを許可Each ligand settles into its own pulse rate after the first spike.
EGF pulses fastest and IGF-1 slowest.
Pulse amplitude overlapped almost completely between ligands, so we trained a decoder on the gaps between pulses alone. Given two hours of a single cell's trace, it named the ligand in 91 percent of held-out cells.
Oleafly に同梱されています。高速でオフラインでも動き、設定は不要です。素の LaTeX とよく使われるパッケージに対応します。
信頼できるプロジェクト専用です。ローカルの TeX ディストリビューションを実行し、あなたのアカウントで読めるファイルにアクセスできます。完全なパッケージ群と複数回のパスに対応します。ホストでのコマンド実行は、プロジェクトごとの別の許可のままです。
このマシンに TeX ディストリビューションは検出されませんでした。
管理者権限が不要なコンパクトな TeX Live です。最初のダウンロードは約 250 MB です。論文誌のテンプレートがあとからパッケージを追加し、合計でおよそ 1 GB になることがあります。先にインストールしておくと、明示的に選んだときにシステムの LaTeX を使えます。
Oleafly が探さない場所に TeX をインストールしている場合は、ここでそのフォルダーを選んでください。latexmk があるフォルダーでも、その上にある TeX Live の年のフォルダー (texlive/2026 など) でもかまいません。
Oleafly に同梱されているため、設定は不要です。ネットワーク接続が必要になるのは、文書が @preview パッケージを初めて読み込むときだけです。
TeX をワンクリックで
管理者権限なしで TinyTeX をインストールすることも、手元にある TeX を Oleafly に指定することも、プロジェクトごとに Typst のバージョンを固定して、古い論文を以前と同じようにビルドすることもできます。
エクスポートと変換
同じ LaTeX ソースから Word、MathML 付きの HTML、Markdown、Typst、プレーンテキストを書き出せます。さらに書籍向けの EPUB、Beamer スライド向けの PowerPoint にも対応します。LaTeX プロジェクトを Typst に変換し、何が変わったかをレポートで確認することもできます。
校正
スペルと文法のチェックは、お使いのコンピュータ上で行います。LaTeX のコマンド、数式、引用キーには手を付けません。
引用
arXiv、Semantic Scholar、Crossref、PubMed、OpenAlex を一度に検索し、結果をリストからそのまま引用できます。
参考文献
引用、ラベル、bib エントリがひとつのパネルに集まっています。未定義のキーや重複したキーは、入力中に指摘されます。
- albeck2013frequencyAlbeck et al. 2013 · Frequency-modulated pulses of ERK activity transmit qua…
- aoki2013stochasticAoki et al. 2013 · Stochastic ERK activation induced by noise and cell-to-…
- purvis2013encodingPurvis & Lahav 2013 · Encoding and decoding cellular information through sign…
Git、GitHub、Zotero
サイドバーからコミットと push ができ、プロジェクトを GitHub に公開でき、Zotero、EndNote、任意の .bib ファイルから参考文献を取り込めます。
- albeck2013frequencyAlbeck et al. 2013 · Zotero · Frequency-modulated pulses of ERK activity transmit qua…
- albeck2008modelingAlbeck et al. 2008 · Zotero · Modeling a snap-action, variable-delay switch controlli…
- gillies2020oncogenicGillies et al. 2020 · Zotero · Oncogenic mutant RAS signaling activity is rescaled by…
Zotero から引用
書きながら @ を入力すると、Zotero ライブラリを検索できます。.bib に入るのは引用した論文だけで、キーには Better BibTeX のキーがそのまま使われます。
Growth Factor Identity
Growth Factor Identity
- Decoder on pulse intervals: 91% of cells
- Decoder on amplitude: 47%
- Same first spike for every ligand
Thank the Hart lab first. Then the question: how does one kinase tell EGF from IGF-1?
Point at the EGF bar. Every ligand gives the same first spike; after that the rates split.
スライドを発表する
PDF ビューアからそのまま発表できます。発表者ビューには、ノート、次のスライド、タイマーが表示されます。
描けば TikZ に
キャンバスに箱と矢印を置き、TikZ のソースに切り替えて編集を続けられます。
/image-to-latex
ノート、数式、表の画像を、編集できる LaTeX にします。
画像端末上のモデルプロジェクト不要
/pdf-to-latex
数式、図、構造を保ったまま PDF を LaTeX に変換します。
数式の抽出図の書き出し端末側で処理
47 の無料ツール
PDF から LaTeX、arXiv から Typst、スプレッドシートから表への変換、BibTeX のチェックなど。プロジェクトは不要です。
すべての作業をひとつの場所に
論文、学位論文、スライド、助成金申請書の下書きが、ひと目で見分けられる表紙になって、ひとつの棚に並びます。検索ではプロジェクト名でも中身の 1 行でもプロジェクトが見つかり、ブックマークで今週の作業を手前に置けます。
AAAI Style Paper
XeLaTeXCC0-1.0
ACL Style Paper
XeLaTeXCC0-1.0
arXiv Preprint
XeLaTeXCC0-1.0
CVPR Style Paper
XeLaTeXCC0-1.0
ICLR Style Preprint
XeLaTeXCC0-1.0
ICML Style Preprint
XeLaTeXCC0-1.0
- エンジン
- XeLaTeX
- ライセンス
- CC0-1.0
- 言語
- 英語
テンプレートパック
学会、論文誌、学位論文のテンプレートをパックでダウンロードできます。一度マシンに入れれば、どのテンプレートもオフラインでコンパイルできます。
Overleaf のプロジェクトを持ち込む
Oleafly から Overleaf にサインインして、プロジェクトを取り込み、同期を保てます。.zip、Word ファイル、arXiv の論文、GitHub リポジトリも使えます。
プリフライト
投稿の前に、レイアウト、アクセシビリティ、参考文献、そして匿名査読の妨げになる要素をチェックします。
AI アシスタント
助けを求め、差分を読み、それから決める。
アシスタントはプロジェクトを読み、コンパイルを実行し、見つけたエラーを直し、TikZ の図の下書きも作れます。編集はそれぞれ差分として表示され、確認して取り消せます。ホスト型のモデルや自分のエンドポイントを使うことも、Ollama を動かしてすべてを自分のマシンにとどめることもできます。
- プランモードでは、何かを書く前にプロジェクトを読みます
- AI をオフにしても、アプリのほかの機能は同じように動きます
replace_in_fileresults.tex31 行目results.tex最初の変更 · L31インライン編集
文を選択して ⌘L(Windows と Linux では Ctrl+L)を押し、どう変えたいかを伝えます。書き換えはその場に差分として表示され、承認するか却下するかを選べます。
説明から図を作成
必要な図を説明してください。アシスタントが TikZ を書き、コンパイルして描画結果を確認します。ワンクリックでプロジェクトに保存できます。
どのモデルでも、オフラインでも
OpenAI、Anthropic、Gemini、DeepSeek などの自分のキーを使うことも、OpenAI 互換の任意のエンドポイントを使うことも、Ollama や LM Studio でローカルモデルを動かすこともできます。
- 91% というデコーダの精度は、学習に使ったセッションから得られたものです。新しい反復実験で検証してください。
- HGF と IGF-1 では頻度と用量が交絡しています。条件をそろえた対照を追加してください。
- 頻度が因果的であることを示すものはありません。振幅を固定して MEK 阻害剤を滴定してください。
レビューとリサーチスキル
投稿前に、やさしいレビューも厳しいレビューも頼めます。リサーチスキルをオンにすれば、あなたの分野で論文がどう書かれるかをアシスタントに伝えられます。
CLI エージェント
すでに契約しているエージェントを、そのまま使えます。
Claude Code、Codex CLI、Gemini CLI などのコマンドラインエージェントは ACP で接続し、プロジェクトの中で作業します。その編集も、ほかの変更と同じようにレビューのため手元に届きます。
- エージェントはそれぞれ自分のアカウントでサインインします
- 編集を 1 件ずつ承認することも、長いタスクを任せきりにすることもできます
results.tex変更を表示Claude Desktop、Claude Code、Cursor などの MCP クライアントは、開いているプロジェクトを読み、編集し、コンパイルできます。変更のたびにあなたの承認が必要です。
XXXXXX
claude mcp add --transport http oleafly http://127.0.0.1:5323/mcp --header "Authorization: Bearer XXXXXX"
MCP で Oleafly を使う
Claude Code、Codex、Cursor、Claude Desktop は、Oleafly の MCP サーバーを通じてプロジェクトを読み、コンパイルし、PDF を確認できます。読み取り専用にしておくことも、変更にはあなたの承認を必須にすることもできます。
Cua Driver を通じて、このコンピュータのアプリとウェブサイトをエージェントが使えるようにします。エージェントがアクセスできるのは、ここに追加したアプリとウェブサイトだけです。
Cua Driver のドキュメント
Cua Driver 0.38.0 がインストールされています。
場所: /Applications/CuaDriver.app/Contents/MacOS/cua-driver
サイトごとに「サインイン済みのブラウザを使う」をオンにすると、そのサイトではエージェントがあなたの Chrome または Edge で作業します。オフの場合は、別のブラウザのプロファイルを使います。
Cua Driver はあなたの制限付きで動作しています。
Computer Use
タスクにプロジェクトフォルダ以上のものが必要なとき、エージェントは Cua Driver を通じて、許可したデスクトップアプリやウェブサイトで作業できます。
PDF プレビュー
草稿のために作った PDF ビューア。
ズーム、見開き表示、ダークモードでの閲覧、検索はすべてツールバーにあります。PDF 内の単語をクリックすると、エディタのその行へジャンプします。ビルドが失敗しても、直している間は最後に成功した PDF が表示されたままです。
- ツールバーから PDF を全画面で発表できます
- 長い文書向けの、引き出し式のアウトライン
in mammary epithelial cells
Cells read growth factors through a small number of shared kinases, yet they respond to EGF, HGF and IGF-1 with different fates. We imaged ERK activity in 2,184 MCF10A cells with a kinase translocation reporter and found that each ligand produces pulses at a characteristic frequency rather than a characteristic amplitude. Frequency alone identifies the ligand in 91 percent of cells.
1 IntroductionEpidermal growth factor, hepatocyte growth factor and insulin-like growth factor all reach the nucleus through the same RAS–RAF–MEK–ERK module, yet epithelial cells migrate, scatter or grow. How a single kinase carries that distinction has been a long-standing question. Early work in PC-12 cells tied fate to whether ERK activity was transient or sustained.
We stimulated MCF10A cells expressing the ERK kinase translocation reporter with saturating doses of EGF, HGF or IGF-1 and tracked nuclear and cytoplasmic signal every two minutes for four hours. All three ligands produced the same first spike within ten minutes. After that the responses diverged: EGF drove pulses about every 19 minutes, HGF about every 41, and IGF-1 rarely more than once an hour.
Live-cell reporters changed the picture. In single cells ERK does not rise and settle; it fires in discrete pulses.
Pulse amplitude overlapped almost completely between ligands, so we trained a decoder on inter-pulse intervals alone. Given the first two hours of a single cell’s trace, it named the ligand correctly in 91 percent of held-out cells, compared with 47 percent for a decoder that saw only amplitudes.
Mutant RAS rescales this code rather than erasing it, which suggests the frequency channel survives oncogenic signalling.
Cells that kept pulsing through hour eight were far more likely to enter S phase. Entry tracked how many pulses a cell fired rather than how tall they were, and blocking the receptor early removed the effect.
3 DiscussionBecause identity sits in the timing of pulses and not in their height, one cascade can serve many ligands at once.
プロジェクトの中のターミナル
論文の横で、普段使っているシェルを使い、最大 10 個のタブでスクリプトを実行できます。出力に出たパスやエラーはクリックできます。
インターフェースの言語を変えても、文書の言語や校正の設定は変わりません。
自分好みに
ライトとダークのテーマ、好みのアクセントカラーとフォント、11 種類のアプリアイコン、そして 22 言語のインターフェース。
oleaflyc
アプリでできることを、すべてターミナルから。
oleaflyc は、アプリと同じエンジンと設定で Oleafly プロジェクトのビルド、チェック、編集を行います。どのコマンドも JSON で応答できるため、スクリプトや CI ジョブ、コーディングエージェントから操作できます。
oleaflyc build --watchビルドと監視
LaTeX、Typst、Markdown を、アプリとまったく同じ方法でコンパイルできます。フォルダを監視して、保存のたびに再ビルドすることもできます。
oleaflyc check --jsonCI でプリフライト
GitHub Action でプリフライトとリンターを実行し、論文が投稿できる状態でなければジョブを失敗させます。
oleaflyc agent run "Make it compile"ヘッドレスエージェント
シェルからアシスタントにタスクを任せられます。あなたのプロバイダーとキーを使い、変更を適用するまでは何も反映されません。
oleaflyc ask "Which sections cite preprints?"プロジェクトについて質問
論文を開かずに、ファイルには一切触れずに、その内容について答えを得られます。
oleaflyc daemon status終了後も動き続ける
研究タスクは、Oleafly を閉じると小さなバックグラウンドヘルパーに引き継がれ、開くと戻ってきます。
oleaflyc cite 10.1038/nature14539シェルから引用を扱う
文献を検索し、DOI から論文を refs.bib に追加し、壊れたキーを査読者より先に見つけます。
oleaflyc mcpエージェント向けの MCP サーバー
Claude Code、Codex、Cursor、Gemini は、これを通じてプロジェクトで作業でき、アシスタントと同じツールを使えます。
oleaflyc remote sync自分たちの共同編集サーバー
サインイン、共有プロジェクトの同期、Oleafly Server の実行まで、すべてコマンドラインで行えます。
oleaflyc import overleafOverleaf のプロジェクトをそのまま取得
Overleaf に一度サインインすれば、Overleaf のどのプロジェクトもローカルのフォルダとして取得でき、シェルから同期を保てます。
oleaflyc convert main.tex --to docxエクスポートと変換
アプリを開かずに、論文を Word、HTML、Markdown に変換したり、LaTeX と Typst の間で移したりできます。
oleaflyc checkpoint restore v12シェルからチェックポイント
成功したビルドのたびに Oleafly が保存したバージョンを一覧し、1 つのコマンドで元に戻せます。
ssh · slurm · cloud大きなマシンで実験
分析や学習の実行を、SSH 経由のサーバー、Slurm クラスタ、クラウドマシンに送り、結果を論文に取り込めます。
強力な研究ハーネス
最初の引用から、最終版の PDF まで。
下書き、コンパイル、校正、検索、引用、レビュー、公開。別々のツールをつなぎ合わせる必要はありません。Oleafly はソース、プレビュー、参考文献、AI、Git 履歴を、あなたが管理するひとつのワークスペースにまとめます。
手元のものを取り込む
テキストベース PDF を編集可能な LaTeX にローカル再構成、管理 Pandoc で DOCX 変換、ページ写真をビジョンモデルで書き起こし。その後の AI 整形は任意。
行き先へ書き出す
コンテキストメニューから PDF、DOCX、HTML、Markdown などを書き出せます。プロジェクト全体をソース ZIP としてダウンロードすることもできます。
自分好みに
Vim モード、ライト/ダーク、アクセント色、7 つのレイアウト、編集可能なショートカット。エディタは手に合うべきです。
コードでもビジュアルでも
LaTeX や Markdown をビジュアル編集へ:見出し、リスト、太字、リンクを直接編集。両モードで連動 undo。未対応コマンドは黙って消さず raw ブロックとして残し、ソース往復は非破壊。
単語単位の SyncTeX
PDF の単語を ⌘-クリックするとソースの同じ語へ。⌘⇧J で戻る。
コードインテリジェンス
定義へ移動、参照検索、ラベル・引用キー・マクロを全ファイルでリネーム。
スラッシュコマンド
/ で Notion 風メニュー:/figure、/table、/section、/cite、/math。
title = {Raft-based KV stores}, …
DOI で引用
DOI・arXiv id・URL を貼る。BibTeX を取得・重複排除し \cite を挿入。
ライブラリごと取り込む
BibTeX・RIS・EndNote XML・Zotero RDF を一括。.bib に載る前にプロジェクトと重複排除。
コマンドパレット
⌘K であらゆる操作をあいまい検索:プロジェクト、ファイル、設定など。
モデルを選ばない AI
好みのモデルプロバイダを接続するか、Ollama をローカルで実行するか、インストール済みの CLI エージェントをそれぞれのアカウントで使えます。承認モードは作業内容に合わせて設定できます。エディタは AI なしでも動作します。
調査をすぐ手元に
エージェントが alphaXiv と OpenAlex を検索し、本文を取り、文献に入る前に Crossref で引用を検証。
内蔵の校正機能
Hunspell と Harper でスペルと文法をローカルで校正します。Oleafly は LaTeX コマンドと数式を無視するので、チェックは本文に集中します。
研究に専用のワークスペースを
タスクの概要を書いてエージェントを選べば、エージェントが隔離されたコピーで作業する間も執筆を続けられます。アクティビティを追い、変更されたファイルをプレビューし、必要な結果を適用します。
1 ページから 600 ページまで
1 枚の履歴書でも書籍級の学位論文でも、エディタと仮想化 PDF は滑らか。
本当に読むための PDF ビューア
プレビューを副画面へ、見開き、夜間の色反転、全画面プレゼン。
ダイアグラムコンポーザー
図を説明すると、AI が TikZ や CeTZ を書き、図を単独でコンパイルし、描画結果を見て重なりを直します。本物のキャンバスに自分で描くこともできます。LaTeX なら TikZ、Typst なら fletcher、Markdown なら Mermaid のフローチャートとして描け、コードと図はどちら側から編集しても同期します。透過の高解像度 PNG を完全オフラインで書き出せます。
3 エンジン、1 ワークスペース
LaTeX・Typst・Markdown のプロジェクトを同じライブラリで管理。プロジェクトごとにコンパイラを選び、同じプレビュー、参考文献、バージョン管理、AI ツールを使えます。
LaTeX エディタ
LaTeX・Typst・Markdown で執筆し、ライブ PDF プレビューと単語単位の SyncTeX を使えます。コンパイラは同梱なので、TeX セットアップもビルドキューも不要です。
AI アシスタント
アシスタントにソース編集、プロジェクトのコンパイル、PDF の確認を任せられます。モデルプロバイダ、Ollama、インストール済みの CLI エージェントを接続。長い作業は研究タスクに任せて、あなたは執筆を続けられます。
参考文献マネージャ
BibTeX・RIS・EndNote・Zotero を自動重複排除付きでインポート。DOI や arXiv ID を貼り付ければ、Crossref で検証済みの参考文献を作成できます。
履歴書作成ツール
ATS 対応の履歴書テンプレートから始め、抽出テキストを確認し、応募ごとに合わせたフォークを作成。以前のバージョンも失われません。
バージョン管理
コンパイル成功後には変更されたソースのチェックポイントを自動作成。Git で意図したコミットを行い、リビジョンを比較し、同じワークスペースから GitHub へプッシュできます。
PDF ツールキット
長い PDF を読み、テキストベース PDF の多くを LaTeX に再構成し、PDF・DOCX・HTML、投稿用のソースアーカイブとして書き出せます。
研究ワークスペース
一つの研究タスクを、最初から最後まで。
エージェントに的を絞ったタスクを任せ、提案された編集を確認し、準備ができたらコンパイルしましょう。成果物はプロジェクトに残ります。
$ theta_(t+1) = theta_t - eta nabla_theta cal(L) $- 01研究プロジェクトを作成原稿・資料・研究タスクを置く場所から始めます。
- 02エージェントにタスクを一つ任せる必要なファイルを選び、変更したい内容を伝えます。
- 03変更提案をレビューする差分を読み、どの編集を原稿に取り入れるか決めます。
- 04コンパイルして成果を残すPDF を確認し、あとで続きから再開。タスクはプロジェクトに残ります。
新しい文書を始める
この原稿の始め方を選べます。どの部分も、後から自由に変更できます。

研究プロジェクト
節構成、資料、レビューノートを備えた研究フォルダと、研究問いを定義する最初のタスク。

プロジェクトをインポート
手元にある原稿を続けます。アーカイブ、Word や Markdown のドラフト、GitHub リポジトリなど。

テンプレートを使う
学術論文・学位論文・レポート・ポスター・講演用のレイアウトから始めます。
新規研究プロジェクト
開始時の構成を選び、Oleafly が作成する前に各ファイルを確認できます。
研究問いを定義し、論文のアウトラインをドラフトします。
- analysis
- figures
- research
- review
- main.tex
- references.bib
\documentclass{article}
\begin{document}
\section{方法}
…
\end{document}新規研究タスク
成果物は、レビューして適用するまで別のワークスペースに保持されます。
方法の記述を明確にする
review/notes.md を使って、方法の段落でどの回答を除外したのかを明確にしてください。main.tex への編集を提案してください。結果は変更しないでください。
適用前に、選択した各ファイルをプレビューできます。
main.tex変更済み\section{方法} main.tex…\section{方法}主要アウトカムを欠く回答は除外した。 \end{document}睡眠と記憶
方法
主要アウトカムを欠く回答は除外した。
研究ループ
調査し、書き、検証し、公開する。
文献検索から投稿まで、文脈を失わずに進めます。Oleafly はソース、参考文献、図、コンパイラ出力、履歴を、中身を確認できるひとつのワークフローにまとめます。
$ bold(tau) = bold(J)^T bold(F) $- doi:10.1145/3576915@article{gatto24} ✓1
調査
オープンな研究ソースを検索し、DOI と arXiv ID を BibTeX に変換し、文献リストに入る前に引用を検証します。
- \section{Results}2
執筆
テンプレート、プロジェクト全体のコードインテリジェンス、承認コントロール付きの任意の AI アシスタントを使って、LaTeX・Typst・Markdown で執筆します。
- compiled · 0 errors ✓3
検証
ローカルでコンパイルし、わかりやすいエラーを読み、ソースと PDF の間を行き来できます。プリフライトは、パーサーとスクリーンリーダーが抽出する内容を示します。
- PDFarXivGitHub ↑4
公開
PDF・DOCX・HTML を書き出し、投稿用にソースをパッケージ化し、作業を始めたのと同じフォルダから GitHub へ push します。
他製品との比較
ほかのすべてを置き換える、唯一の研究ワークスペース。
執筆、コンパイル、校正、文献検索、引用管理、PDFレビュー、編集の自動化、論文の提出まで、すべてを1か所で。Oleaflyは研究に必要なツール一式を、無料のオープンソースアプリに集約します。ほかの選択肢に何が足りないのか、以下でご確認ください。 ドキュメント.
| Oleafly | OpenAI PrismRIP · 2027年1月1日 | Overleaf | Typst Web App | Curvenote | LyX | TeXstudio | Texifier | VS Code + LaTeX | Paperpal | Writefull | 履歴書作成ツール | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 所有権とアクセス | 価格 | 無料かつオープンソース。Oleaflyのサブスクリプションは不要 | ChatGPTアカウントがあれば無料 | 無料プランあり。有料プランでは機能を追加 | 無料プランあり。Proは別料金 | 無料プランあり。有料プランでは非公開プロジェクトを追加 | 無料かつオープンソース | 無料、GPL | 有料。無料デモあり | 無料。AIには利用上限または有料プランあり | 無料プランあり。Primeは別料金 | 無料プランあり。Premiumは別料金 | 製品により異なる。大半はサブスクリプション制 |
| アカウント不要 | はい | いいえ | いいえ | いいえ | いいえ | はい | はい | はい | はい | いいえ | いいえ | 製品により異なる | |
| 対応プラットフォーム | macOS、Windows、Linuxのデスクトップアプリ | Webのみ | Web。セルフホスト型のServer Proもあり | Web。オンプレミスプランもあり | Webエディターとオープンソースのコマンドラインツール | Windows、macOS、Linux | Windows、macOS、Linux | macOSとiOS。Windows版は近日対応 | Windows、macOS、Linux | Web、Word、Google Docs、Overleaf | Word、Overleaf、Web | 主にWeb | |
| オフライン対応 | 執筆、コンパイル、チェック、コミットをオフラインで実行。共有の編集は後でマージ | 非対応。クラウドワークスペース | 非対応。クラウドサービス | 非対応。Webアプリには接続が必要 | 非対応。エディターはクラウドサービス | はい | はい | はい | はい | いいえ | いいえ | ほとんど非対応 | |
| インターフェースの言語 | 21言語 | 文書化されていない | 18言語 | 文書化されていない | 文書化されていない | 26言語(完成度はまちまち) | コミュニティによる翻訳で約30言語 | 8言語 | 15言語 | 文書化されていない | 文書化されていない | 製品により異なる | |
| ファイルをローカルに保存 | 自分が所有する普通のフォルダー | クラウドストレージ | クラウドストレージ | クラウドストレージ。コンパイラーはローカル実行可能 | クラウドストレージ | はい | はい | ローカルファイルとファイルプロバイダー | はい | クラウドサービスとエディター連携 | ファイルはWordまたはOverleaf内に保持 | 通常はクラウドストレージ | |
| 共同編集と同期 | リアルタイム共同編集 | 組み込み。リアルタイム共同編集、名前付きカーソル、共著者数は無制限 | 共同編集者数は無制限 | 組み込み。上限はプランにより異なる | 組み込み | リアルタイム編集とコメント | リアルタイム共同編集なし | Teamtype経由のピアツーピア | Texifier Connectでリアルタイム編集 | Live Share経由 | Word、Google Docs、またはOverleafを使用 | WordまたはOverleafを使用 | 製品により異なる |
| リアルタイムのコメント | 返信、@メンション、解決済みの設定ができるスレッド | はい | はい | はい(オーナーにProプランが必要) | はい | いいえ | いいえ | 文書化されていない | 拡張機能経由のみ | 連携先のエディター内のみ | 連携先のエディター内のみ | ほとんどなし | |
| 自前のサーバー | Oleafly Server:コマンド1つでインストール、管理コンソール、SSO | いいえ | はい | オンプレミスプラン | 文書化されていない | いいえ | ピアツーピア。1人がホストを担当 | 文書化されていない | いいえ。Live ShareはMicrosoftがホスト | 文書化されていない | 文書化されていない | ほとんどなし | |
| クラウド同期 | ライブラリと設定をDropboxで同期 | クラウドワークスペース | クラウドワークスペース。有料でGitおよびDropbox同期に対応 | クラウドワークスペース。ProでGit同期に対応 | クラウドプロジェクトと連携型出版 | Gitまたは任意の同期サービスを利用 | Gitまたは任意の同期サービスを利用 | Texifier Connectによるリアルタイム同期 | Gitまたは任意の同期サービスを利用 | クラウドワークスペース | WordまたはOverleaf内で動作 | 通常はクラウドストレージ | |
| 共有プロジェクトとロール | オーナー、編集者、閲覧者のロールを持つ共有プロジェクト | 人数無制限で共同利用できる共有プロジェクト | グループ・機関向けプラン | 共有プロジェクト。組織向けオンプレミス版も提供 | チームワークスペースとアクセス制御 | 組み込みのチームスペースなし | 組み込みのチームスペースなし | Texifier Connectを介した共有プロジェクト | GitHub OrganizationsとLive Share | 機関向けダッシュボードとライセンス管理 | 機関向けアクセス | 製品により異なる | |
| バージョン履歴 | コンパイルが成功するたびにチェックポイントを保存し、復元も可能 | クラウド上のリビジョン | 有料プランで完全な履歴を提供 | ProでGit同期に対応 | 組み込みのバージョン履歴 | Gitなどのバージョン管理 | 手動またはSVN | ファイルプロバイダーまたはGitツールを使用 | 自分で設定する組み込みGit | 文書化されていない | ホストアプリの履歴を使用 | 製品により異なる | |
| GitとGitHub | Gitパネルを内蔵。GitHubへの公開、push、pull | 未対応。予定あり | 有料プランでGitとGitHub | ProプランでGitHubとGitLabを同期(試験的) | GitHub連携とコマンドラインツール | 基本機能のみ。ローカル限定 | Gitパネルを内蔵。SVNにも対応 | 文書化されていない | 組み込み | 文書化されていない | 文書化されていない | いいえ | |
| 執筆と出版 | 文書エンジン | 1つのワークスペースでLaTeX、Typst、Markdownに対応 | LaTeXのみ | LaTeXのみ | Typstのみ | MyST MarkdownとJupyter | LaTeXとDocBook | LaTeXのみ | LaTeXとMarkdown | 拡張機能経由 | Word、Google Docs、Web、Overleaf | WordとOverleaf LaTeX | 履歴書形式のみ |
| TeXのセットアップ | Tectonic、Typst、Pandocを同梱。TeXのインストール不要 | インストール不要。クラウドでコンパイル | インストール不要。クラウドでコンパイル | TeXのインストール不要 | TeXのインストール不要 | TeXディストリビューションのインストールが必要 | TeXディストリビューションのインストールが必要 | 組み込み組版エンジンとパッケージマネージャー | 拡張機能とTeXのインストールが必要 | LaTeXにはOverleafを使用 | LaTeXにはOverleafを使用 | TeXのセットアップ不要 | |
| コード編集+ビジュアル編集 | ソース編集とビジュアル編集をロスレスで相互変換 | ソース編集とプレビュー | ソース編集とリッチテキストモード | ソース編集とライブプレビュー | LaTeX数式に対応したビジュアルエディター | 構造化ビジュアルエディター | ソース編集のみ | ソース編集とPDFプレビュー | ソース編集のみ | ビジュアル型ライティングアシスタント | インラインの文章改善提案 | ビジュアル編集のみ | |
| プロジェクト全体のコードインテリジェンス | 自動補完、定義・参照の検索、プロジェクト全体の名前変更 | エディターとAI支援 | 自動補完と参照検索 | エラー表示、自動補完、Assists | 構造化された参照と数式 | ラベル、参照、アウトライン、自動補完 | 構造・参照チェッカー | 自動補完、アウトライン、参照、検索 | LaTeX Workshop IntelliSense | LaTeXコードツールなし | LaTeXコード向けTeXGPT | なし | |
| ソースとPDFの同期 | LaTeXとTypstでソースとPDFを双方向にジャンプ | PDFを即時プレビュー | ソースとPDFの同期 | ライブプレビュー | ソースとPDFの同期なし | ソースと出力のプレビュー | ほぼ単語単位 | ソースとPDFの同期 | 順方向・逆方向のSyncTeX | なし | Overleafのプレビューを使用 | なし | |
| PDF閲覧モード | 組み込みビューアーに加え、別ウィンドウ表示、見開き、ダーク、リーダーの各モード | 組み込みプレビュー | 組み込みプレビュー | 組み込みプレビュー | 文書プレビュー | PDFビューアーを使用 | 統合ビューアー | 統合PDFビューアー | 色反転モード付き拡張ビューアー | PDFとのチャット | PDFリーダーなし | 文書プレビュー | |
| 文書テンプレート | 24パックに1,800以上のテンプレート、さらに自作のテンプレートも | 文書化されていない | 出版社テンプレートの大規模ギャラリー | Typst UniverseとProの非公開テンプレート | 有料プランでプロ向けテンプレートを提供 | 組み込みの文書クラス | 組み込みテンプレートとユーザーテンプレート | 文書化されていない | スニペットとコミュニティテンプレート | 文書化されていない | なし | 中核機能 | |
| プロジェクトと文書のインポート | ZIP、フォルダー、GitHub、arXiv、Word、HTML、Typst、Markdown、PDF、オンラインLaTeXエディターのアカウント | フォルダー、ZIP、またはドラッグ&ドロップ | ファイル、ZIP、有料の外部連携 | LaTeX、Word、Markdownを変換 | Jupyterコンテンツと参考文献をインポート | LaTeXなどのテキスト形式 | ローカルのソースファイルを開く | ローカルフォルダーとクラウドファイル | ローカルのソースファイルを開く | PDFと文書のアップロード | Word文書とOverleaf文書 | 通常はPDFまたはDOCX | |
| エクスポート形式 | PDF、PDF/A、PDF/UA、DOCX、HTML、EPUB、PowerPoint、Markdown、Typst、LaTeX | PDFとプロジェクトファイル | PDFとソースZIP | PDF、PNG、SVG | PDF、Word、LaTeX、Typst、MyST | PDF、HTML、Word、RTF、ePubなど | PDFとソースファイル | PDFとソースファイル | ローカルツールに依存 | Wordワークフロー | 変更履歴付きWord文書 | 通常はPDFとDOCX | |
| ビジュアル・AI作図ツール | キャンバスに描くとTikZ、Typst、Mermaidのコードに | 画像や音声からコードを生成 | 手動のTikZとAIツール | Typstパッケージとネイティブ描画 | インタラクティブなチャートと図 | ビジュアル表作成・画像ツール | エディター支援付きの手動TikZ | 手動のTikZ | 手動または拡張機能 | なし | AIによる表、数式、図の生成 | なし | |
| 内蔵ツール | 47の変換ツールに加え、引用と数式のツール | 画像や音声からLaTeXへ | 専用のギャラリーなし | 文書化されていない | 文書化されていない | いいえ | 表、図、クイックスタートのウィザード | 文書化されていない | 拡張機能経由 | 言い換え、翻訳、引用、PDFチャット | 言い換え、学術的な文体への書き換え、タイトルと要旨の生成 | ATSチェッカーとカバーレター生成 | |
| 研究とAI | AIアシスタント(モデルは自由) | +4自分のキーを使用。10のホスト型プロバイダーまたは任意のカスタムエンドポイント | OpenAIモデルを組み込み | 研究向けAIを組み込み。1日あたりの利用枠はプランにより異なる | AIアシスタントなし | 文書化されていない | なし | Mistral、Claude、OpenRouter、ChatGPT、またはローカルモデル | なし | Copilot、BYOK、または拡張機能 | Paperpal AI | WritefullモデルとGPT | 組み込み。モデルの選択肢は製品により異なる |
| エディター内のCLIエージェント | +714のエージェントがエディター内で動作。任意のACPエージェントにも対応 | Codexを組み込み | 文書化されていない | 文書化されていない | 文書化されていない | 文書化されていない | 文書化されていない | 文書化されていない | Copilot、Claude、Codex | 文書化されていない | 文書化されていない | 製品による | |
| ローカルAI | Ollamaまたは任意のローカルOpenAI互換サーバー | なし | なし | なし | なし | なし | Ollama、llama.cpp、llamafile | なし | BYOKまたは拡張機能 | なし | なし | なし | |
| 適用前にAIの編集内容を確認 | すべての変更を差分で表示。4つの承認モードとファイル単位の取り消し | 保持または取り消し | AIの提案を確認 | AIアシスタントなし | 文書化されていない | 組み込みAIなし | 組み込みAIなし | 組み込みAIなし | 変更内容を確認 | 文章の改善提案を確認 | 変更履歴 | 製品により異なる | |
| AIによるレンダリング結果の検証 | ソースを編集・コンパイルし、レンダリング済みPDFを検証 | 再コンパイルして自分で確認 | 再コンパイルして自分で確認 | AIアシスタントなし | なし | 組み込みAIなし | 組み込みAIなし | 組み込みAIなし | PDFレビューを伴わないビルドチェック | レンダリング済みPDFのレビューなし | レンダリング済みPDFのレビューなし | なし | |
| AIスキル | 36の研究スキルを内蔵。追加のダウンロードも可能 | Paper Reviewなどの組み込みスキル | 主張のチェックを1つ組み込み | AIアシスタントなし | 文書化されていない | AIアシスタントなし | 編集可能なプロンプトとAIマクロ | AIアシスタントなし | はい | プリセットとカスタムのプロンプト | 文書化されていない | せいぜいカスタムプロンプト | |
| 文献・引用検索 | arXiv、Semantic Scholar、Crossref、PubMed、OpenAlexを一度に検索 | 組み込みの文献検索 | 参考文献検索とAIによる引用候補の提案 | 組み込み検索なし | DOIによる引用情報検索 | 組み込み検索なし | なし | 組み込み検索なし | AIまたは拡張機能経由 | 2億5,000万件以上の論文を横断検索 | Writefull Citeが不足している引用を検出 | なし | |
| 研究ワークスペースとタスク | 研究タスク:隔離されたワークスペース、エージェントのアクティビティ、ファイルプレビュー、選択的な適用 | 文書化されていない | 文書化されていない | なし | 文書化されていない | なし | なし | なし | AI拡張機能経由 | なし | なし | なし | |
| 参考文献ライブラリのインポート | Zoteroアプリとウェブライブラリ、BibTeX、RIS、EndNote、Zotero RDF | Zotero同期 | 有料プランで参考文献連携に対応 | ProでZoteroおよびMendeley同期に対応 | Zotero、Mendeley、EndNote | BibTeXファイル | BibTeXファイルに対応 | BibTeXファイル | 拡張機能経由 | 引用情報ジェネレーター | ライブラリのインポートなし | なし | |
| 外部AIエージェント向けMCP | MCPツールをアシスタントに接続、またはプロジェクトのツールを外部エージェントに公開 | なし | なし | なし | なし | なし | なし | なし | あり | なし | なし | なし | |
| 品質と投稿 | 投稿前チェック | 6つのチェック:コンパイル、投稿要件、ATS、アクセシビリティ、参考文献、プライバシー | 投稿支援スイートを伴わないAIレビュー | コンパイルチェック | コンパイラーエラーとAssists | SCMS準拠ツール | コンパイラーログと任意のChkTeX | エラーと警告 | わかりやすいコンパイラーエラー表示 | 拡張機能によるLint | 30項目以上の投稿前チェック | 文章品質レビュー | 履歴書チェックのみ |
| スペル・文法チェック | LaTeXを認識する文章チェックにより、スペルと文法を非公開かつオフラインで校正 | AI校正 | 組み込みスペルチェックと研究文書に特化したAIフィードバック | 文書化されていない | 文書化されていない | Hunspell、Aspell、類語辞典 | 対話型のスペル・文法チェック | スペルチェック | 拡張機能またはAI経由 | 学術文書向けの文法・スタイルチェック | 学術文書向けの言語フィードバック | 基本チェックの内容は製品により異なる | |
| 履歴書のATSチェック | 採点式ATSチェックと抽出テキストのプレビュー | なし | なし | なし | なし | なし | なし | なし | 組み込みチェックなし | なし | なし | 製品により異なる。採点基準は不明瞭な場合が多い | |
| アクセシビリティ事前チェック | 106項目のPDF/UAチェックと、アクセシブルなエクスポートの準備 | なし | なし | 文書化されていない | 構造化Web出版 | 構造化文書。事前チェックなし | なし | 文書化されていない | 組み込みチェックなし | なし | なし | 製品により異なる | |
| 匿名査読向けチェック | 著者名、謝辞、PDFのメタデータ、コメントを検出 | 文書化されていない | 文書化されていない | 文書化されていない | いいえ | 文書化されていない | 文書化されていない | 文書化されていない | 文書化されていない | 文書化されていない | 文書化されていない | いいえ | |
| 参照とファイルのチェック | 未定義の参照、見つからないファイル、重複キー、引用されていない文献 | AIによるエラー修正とPaper Review | AIによる.bibと主張のチェック | ラベルが見つからないとコンパイラーエラー | DOI、リンク、相互参照、画像のチェック | 壊れた相互参照に印を付ける | リアルタイムの参照チェック | LaTeXのエラー一覧のみ | ChkTeXとLaCheckによるLint | 参考文献や図を含む30以上のチェック | 出典のない主張を検出(機関向け) | いいえ | |
| 単語数と文書の分析 | 単語数に加え、見出し、図、表、引用、TODO | 文書化されていない | はい | 文書化されていない | 要旨の語数制限チェック | はい | はい | はい | はい(TeXcount経由) | 文書化されていない | 文書化されていない | 履歴書の分析スコア |
プライバシーを正確に
既定はローカル。ネットは選択時だけ。
プロジェクトはあなたのマシンに残ります。Oleafly がネットワークを使うのは、あなたが選んだ機能のときだけで、クラッシュレポートは送信前に表示されます。Oleafly アカウントなし。テレメトリなし。 プライバシー.
常にローカル
Wi-Fi オフでも動作
- プロジェクトファイル、下書き、保存済みチェックポイント、Git 履歴
- 執筆、コンパイル、PDF の確認、プリフライトチェック
- オフラインのスペルチェック、文法チェック、ダイアグラム、任意の Ollama
操作したときだけネットワーク
クリックしたときだけ
- ホスト型 AI が受け取るのは、あなたが送ると決めた文脈だけ
- GitHub 同期と文献検索は、リクエストしたときに実行
- パッケージ、テンプレート、フォント、アプリの更新は必要に応じてダウンロード
\[ v = \frac{V_{\max}[S]}{K_m + [S]} \]\[ p^2 + 2pq + q^2 = 1 \]哲学
研究は、それを生み出したツールよりも長く残るべきだ。研究は、それを生み出したツールよりも長く残るべきだ。
\[ v = \frac{V_{\max}[S]}{K_m + [S]} \]\[ p^2 + 2pq + q^2 = 1 \]
本気のオープンソース
意図して独立。コミュニティのために開発。
Oleafly はオープンに開発されています。信頼性も製品の一部です。キャンセル可能なコンパイルや安全なファイルパスから、Git 復旧、PDF フォールバック、macOS・Windows・Linux にわたるテストまで。
コードの確認、issue の報告、修正の提供、Oleafly への Star はこちら: GitHub.
よくある質問(FAQ)
乗り換える前に知っておきたいこと。
答えが見つかりませんでしたか?質問はこちらへ: Discord または GitHub Discussions.
01Oleafly とは何ですか?+
Oleafly は、論文・学位論文・履歴書などの技術文書向けの無料デスクトップワークスペースです。LaTeX・Typst・Markdown で執筆し、PDF をプレビューし、参考文献を管理し、任意の AI アシスタントを利用できます。プロジェクトはコンピュータ上の普通のファイルのまま残ります。
02本当に無料ですか?+
はい。Oleafly は無料でオープンソースです。デスクトップアプリがサブスクリプションを課すことはありません。有料の AI プロバイダを接続した場合、そのプロバイダの利用料金が発生することがあります。Ollama 経由のローカルモデルに有料 API は不要です。
03どの AI モデルに対応していますか?+
10 のホスト型プロバイダのいずれかのキーを使うか、Ollama でモデルをローカル実行するか、OpenAI 互換の任意のエンドポイントを Oleafly に指定できます。Claude Code や Codex をはじめとする 14 のコマンドラインエージェントも、すでにお持ちのツールとアカウントのままエディタ内で実行できます。ランタイムとモデルはアシスタントで選びます。
04アカウントは必要ですか?+
いいえ。何にも登録せずに Oleafly をインストールして執筆でき、プロジェクトはコンピュータ上の普通のフォルダに置かれます。サインインが必要なのは、グループが運用する共同編集サーバーに参加するときと、Dropbox 同期をオンにするときだけです。AI プロバイダや Git ホスティングサービスでは、それぞれの資格情報を使います。
05どのツールを置き換えられますか?+
多くのワークフローでは、Oleafly が執筆・校正・コンパイル・引用・PDF・履歴書・AI・Git の個別クライアントを置き換えられます。普通のファイルと GitHub をそのまま扱うので、仕事を独自形式に閉じ込めることなく導入できます。
06既存の論文や履歴書をインポートできますか?+
はい。フォルダを開く、ZIP をインポートする、GitHub からクローンする、arXiv から論文を直接取り込む、のいずれでも始められます。オンライン LaTeX エディタからの書き出しにも対応し、メイン文書は Oleafly が見つけます。テキストベースの PDF はローカルで LaTeX に変換され、Word ファイルは Pandoc で変換され、スキャンや写真はビジョンモデルで書き起こせます。
07PDF 出力は ATS 対応ですか?+
ATS 適合度はテンプレートと内容次第なので、Oleafly はスコアを保証しません。履歴書テンプレートは選択可能な Unicode テキスト、埋め込みフォント、1 段レイアウト、線形な読み順を採用しています。プリフライトは、PDF を送る前にパーサーが実際に抽出する内容を示します。
08共同編集と同期はどうなりますか?+
同じプロジェクトをリアルタイムで一緒に編集できます。カーソルには名前が表示され、コメントは対象の行の横に付きます。グループは自前の Oleafly Server を運用し、各自はプロジェクトを自分のコンピュータ上の普通のファイルとして持つので、オフラインでも書き続けられ、再接続すると編集が同期されます。Dropbox 同期を使えば、ライブラリと設定を自分のデバイス間でそろえておけます。Git も併用できます。GitHub に公開し、Oleafly 内から push と pull を行えます。
09オフラインや AI なしで執筆できますか?+
はい。執筆、ローカルコンパイル、PDF レビュー、校正は AI なしで動作します。オフラインにする前に、プロジェクトで必要なパッケージ、フォント、ツールをダウンロードしてください。ローカル AI では、Ollama でモデルをダウンロードし、そのローカルサーバーを接続します。
10私が執筆を続けている間に、エージェントは作業できますか?+
はい。研究タスクを開き、タスクに概要を伝え、エージェントを選びます。エージェントは隔離されたコピーで作業し、あなたは論文を続けられます。アクティビティを追い、変更されたファイルをプレビューし、選んだ結果を適用してください。
\[ E = h\nu \]ダウンロード
無料。オープンソース。あなたのもの。
最新リリースのプリビルドインストーラを取るか、 ソースからビルド。アカウント不要、テレメトリなし。
一部のビルドでは、初回起動時に OS の警告が表示される場合があります。確認すべき点と続行方法は インストールガイド で説明しています。